Using The Setup Navigator - Pioneer HTZ-55DV Operating Instructions Manual

Using the setup navigator

Before playing any discs, we strongly recommend using the Setup Navigator. This makes all the
basic system settings for you.
1 Press SYSTEM to switch on.
Also turn on your TV and make sure that it
is set to the correct video input.
• If a disc already loaded starts playing,
press 7 to stop it.
2 Press DVD then SETUP.
The Setup Navigator on-screen
display (OSD) appears:
Audio Video Language General
Setup Navigator
Setup Navigator Start
Auto Start Off
Move ENTER Select SETUP
Navigate all of the following OSDs using
these controls:
%, fi – cursor up/down
ENTER – select the highlighted menu
option
@ – go back to the previous question
The control possibilities for the current
OSD are shown at the bottom of each
screen.
3 Select START.
Remember: Press
ENTER
option.
• If you decide you don't want to use the
Setup Navigator, select Auto Start
Off here instead.
4 Choose an OSD menu
language.
Audio Video Language General
Setup Navigator
Language
English
OSD Language français
Español
Move ENTER Select SETUP
5 Select the type of TV you have.
Audio
Setup Navigator
TV Connection
• See Aspect ratio in the glossary on page
58 if you're unsure of the difference
between widescreen and standard TVs.
6 Confirm all the settings.
Audio
Setup Navigator
Exit
Exit Setup Navigator
7 Press SETUP to exit.
Congratulations, you've set up your
system!
If you want to use the Setup Navigator
again at any time, it is available from the
General menu. Also, each individual
setting can be changed using the
appropriate menu option — chapter 9
explains all menu options in detail.
to select an
Exit
3 Getting Started
Video Language General
TV Type
Widescreen (16:9)
Standard (4:3)
Move Select Exit
ENTER SETUP
Video Language General
Save Changes
Delete Changes
Start Again
Move Select Exit
ENTER SETUP
13
En