Brother 891-Z08 Operation Manual page 17

e
Enter the network key (password) noted in step
a
, and then press
Repeatedly press
characters appear.
0123456789abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!"#$%&'()*+,-./:;<=>?@[]^_
When the desired character appears, press
then enter the next character. To erase an entered
character, press . After entering the entire
password press .
f
When the following message appears, press
to select [Yes].
Apply Settings?
▼Yes ▲No
• After completing the setup, continue with step
on p. 14.
Memo
• If a connection was not successfully
established:
• If the following message appears, an incorrect
network key (password) may have been
entered. Press
procedure again starting with step
Connecting Manually" on page 15.
Network key error (Err-04).
Press [OK] button.
- For details on other causes, see "ERROR
MESSAGES" on page 57.
• Once a wireless connection has been set up, a
wireless network connection can be
established next time simply by turning on the
machine. However, the machine must be left in
wireless mode.
• After connecting to the machine, click
[DesignNCut] in the main window of
DesignNCut Manager, click [Settings], then
[Network], and then set [WLAN Enable] to [ON].
16
.
or until the following
, and
d
, and then perform the
c
of "C:
■ D: Connecting Using a USB Cable
The wireless connection can be set up using the
dedicated application "WLAN Assistant Wizard" (WAW
<USB>) and connecting the machine and computer
with a USB cable.
Computers That Can Connect to This
Machine
For details on the computers that can connect to this
machine, see "Devices That Can Connect to This
Machine" on page 3.
USB cable (sold separately)
• We recommend using a USB 2.0 cable (Type A/B)
of 2.0 m or less.
Note
• The connectors on the USB cable can only be
inserted into a port in one direction. If it is
difficult to insert the cable connector, do not
insert it with force and check the orientation of
the connector.
a
Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
a USB port for a computer
b USB cable
b
Select [Setting with WAW(USB)], and then
click [Next].
c
Follow the on-screen instructions to complete
the setup.
• After completing the setup, continue with step
on p. 14.
d