Motorola MBP86SN User Manual page 4

Operation of the Touch Control Buttons
Wi-Fi (Pair Key)
0
On/Off Button
Warm Mist
Mist Level
Night Light
Air Refreshing
Timer
Humidity
Press and hold the Power On-Off / Wi-Fi (Pair
Key) button for 3 seconds to enter Wi-Fi pairing/
setting mode.
Tap to turn the unit On or Off. When the unit is
turned on, the display lights up to indicate the
current mist level and RH value. Both the water
tank and night light lamp will also light up.
Tap to turn warm mist On or Off. It takes about
25 minutes for the mist to warm up.
Tap to cycle through the speed options (1, 2, 3 or
Auto). The selected speed is shown on the LED
display.
Press and hold the Air Refreshing function /
Night Light button for 2 seconds to turn night
light On or Off.
Tap to activate air refreshing function.
Tap to cycle through the timer settings (from 1
hour to 12 hours). The timer icon and the
selected timer will appear on the LED display for
around 3 seconds. To exit timer mode, press and
hold the timer key for 2 seconds.
To maintain the room's humidity at a specific
level, tap to cycle through and select the specific
RH humidity (30%, 35%, 40%, 45%, 50%, 55%,
60%, 65%, 70%, 75%).
The Humidifier will then control the mist level by
turning it on/off automatically according to the
ambient relative humidity in comparison with the
setting.
To cancel the mode, press and hold the key for 2
seconds.