Parts Identification - Sony MCX-500 Operating Instructions Manual

000 7
Chapter 1: Introduction

Parts Identification

Control Panel
Video switching, audio mixing, and other live controls are performed via the control panel.
1 2
VIDEO VIDEO
9 INPUT TERMINALS SDI SDI
1.
PGM master fader
Adjusts the audio output level for the PGM
output.
The output level will be the same for the L and
R channels.
The adjustment results can be monitored via
the headphones connected to the
(headphones) jack on the front of the unit or
via the level meters displayed on the multi-
viewer.
3 4 5 6
HDMI HDMI TITLE TALLY MULTI VIEWER PGM
SDI SDI
INPUT
7 8 9
2.
AUDIO ACCESS buttons
Displays menus for adjusting the audio in the
menu panel. Pressing the button again hides
the menus.
Buttons 1 to 4: Displays the audio adjustment
menus for audio corresponding to inputs 1
to 4 of the video selection block.
LINE button: Displays the audio adjustment
menu for the LINE input connectors.
When an audio input is being used for
PGM output, the corresponding button
lights.
(Unlit): Not being used as PGM
output.
(Lit): Output as PGM in progress.
LINE
OUTPUT
For details, see "Live Adjustments" (page 37).
3.
RECORDING button
Displays the menu for performing recording
operations in the menu panel. Pressing the
button again hides the menu.
The lit status of the button indicates the
recording status.
(Unlit): Recording is stopped.
(Lit): Recording is in progress.
For details, see "Chapter 6: Recording" (page 56).
4.
STREAMING button
Displays the menu for performing streaming
operations in the menu panel. Pressing the
button again hides the menu.
The lit status of the button indicates the
streaming status.
(Unlit): Streaming is stopped or in
standby mode
(Lit): Streaming is in progress.
For details, see "Chapter 5: Streaming" (page 54).
5.
Menu panel (touch panel)
Displays a menu based on the operation or
function being performed.
You can perform transition or composite
pattern selection and other controls and
adjustments for each function here.
Confirmation messages and error messages
are also displayed here.
Example display: Transition pattern selection
menu
Example display: Audio adjustment menu