Bass Management - Yamaha MMP1 Operation Manual

5-2. Bass Management

When applying bass management to the system, configure the speaker matrix in the following manner.
NOTE
Set the connection with the MMP1 to "Offline" before changing settings.
1.
Of the Main Monitor outputs, split each channel (other than the LFE channel) into two separate inputs—one for
applying an HPF and another for applying an LPF—and direct these to Speaker Matrix In.
NOTE
When using stereo monitor speakers separately, create a separate set of inputs for stereo speakers in addition to the inputs for bass
management. Since these filters are applied to bass management inputs they are not compatible with stereo monitors.
Speaker Matrix screen
2.
Configure channels applying an HPF and channels applying an LPF in the following manner.
Settings screen - Scene - Speaker Matrix
3.
Route channels applying an HPF to the Speaker Matrix Out connected to each speaker, and channels applying
an LPF to the Speaker Matrix Out connected to the subwoofer.
Speaker Matrix screen
Bass management settings are now complete.
This example assumes that Main Monitor 1-6 is set to
L/R/C/LFE/Ls/Rs, respectively.
5. Configuring System Settings
MMP1 Operation Manual 59