Address Space - Siemens SIMATIC Manual

Parameters/address space

4.3 Address space

4.3 Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the inputs.
Configuration options of DI 8x24VDC SRC BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure
the module using a GSD file, the configurations are available under various short
designations/module names; see the table below. The following configurations are possible:
Table 4- 2 Configuration options with GSD file
Configuration
1 x 8-channel without value status DI 8x24VDC SRC BA V0.0
Address space of the digital input module DI 8x24VDC SRC BA
The figure below shows the assignment of the address space for DI 8x24VDC SRC BA.
Figure 4-1
20
Short designation/module
name in the GSD file
Address space of the digital input module DI 8x24VDC SRC BA
Configuration software, e.g. with STEP 7 (TIA Portal)
Integrated in
hardware catalog PROFINET IO
STEP 7
V14, SP1 or high-
er with HSP 0222
Digital output module DI 8x24VDC SRC BA (6ES7131-6BF61-0AA0)
GSD file GSD file
PROFIBUS DP
X X
Manual, 09/2017, A5E32855511-AC