Table of Contents
Advertisement
Settings
(M 12)
Profiles
(M 12-1)
The tone sound and vibration settings can be customised for each
profile according to your environment.
There are 6 profiles: "Normal", "Meeting", "Activity", "Car",
"Headset" and "Silent".
Activating a Profile
→
"Settings"
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding indicator described on
page 19 is displayed in standby.
Tip
• Press and hold R to switch Profiles settings between the mode
most recently activated and Silent mode in standby.
Resetting Profile Settings
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "9999". For details on changing the
handset code, see "To Change the Handset Code" on page 105.
Ringer Volume
You can adjust the ringer volume to one of six levels or to an
increasing volume.
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Ringer Volume".
4.
Press a (or d) to increase the ringer volume or press b (or
c) to decrease the ringer volume and then press
To select "Increasing Volume", press a (or d) at level 5.
To select "Silent", press b (or c) at level 1.
Tip
• You can select from two levels or an increasing volume, when
selecting the "Silent" profile.
Assigning a Ringtone
You can select the ringtone from 28 tones including 5 patterns, 13
sound effects and 10 melodies. You can also select a sound in Saved
Sounds as the default ringtone excluding the AMR or WAVE format.
→
"Settings"
"Profiles"
.
Settings
93
Advertisement
Table of Contents
