Connecting Multiple Units With The Lan - Sony BVM-E251 Operating Instructions Manual

BKM-37H/38H/39H. Or connect the output cable
of the AC adaptor supplied with the controller to
the DC 12V connector of the controller.
Note on connecting the cable to the DC 12V
OUT connector
Insert the connector so as to fit the shape of the DC 12V
OUT connector.
Connecting Multiple Units
with the LAN
The controller controls up to 32 monitors. Up to three
controllers are connected to one monitor in single mode.
Notes


Fit the shape of the
connector.
NETWORK switch:
Set to LAN.
Switching hub
(recommended:
with AUTO MDI/
MDI-X function)
1
The controller cannot control monitors in another
subnetwork.
When you connect the BKM-16R, refer to the
operating instructions of BKM-16R.
NETWORK switch:
Set to LAN.
LAN (10/100)
connector
LAN (10/100)
connector
Controller
(BKM-17R)
NETWORK switch:
Set to LAN.
Turn off the power switch of the monitor before
connecting the units.

Connecting Multiple Units with the LAN

LAN (10/100)
connector
AC adaptor
(supplied with the
BKM-17R)
DC 12V
connector
17