Add Camera - D-Link DNR-202L User Manual

Mydlink camera video recorder

Hide thumbs Also See for DNR-202L:

Table of Contents

Section 5: Configuration

Step 1: Click the Search button to search for UPnP cameras. The system will list

all the available cameras at this moment. Click the + icon to add this camera into

your camera list. If the cameras are already added, they will be listed in red.

Step 2: After clicking the icon, the camera setting page will pop-up. Click on the

camera that you want to add.

Step 3: Enter the camera name, user name, and password of the camera.

Note

• Some cameras will limit the login authority to the administrator only.

• To add cameras without the UPnP function, please go to the Camera Setup menu and enter

the IP address manually.

• You may not be able to see all the cameras on your first search. It may take a moment for

the devices to respond to the UPnP request. Please click Search again if cameras are not

immediately displayed.

Step 4: Click the Add button to add the selected camera.

Step 5: After clicking Add, the updated information will be displayed in the

camera list.

Step 6: Repeat steps 2 through 5 to add other cameras to your list.

D-Link DNR-202L User Manual

Add Camera

Table of Contents