LG C1150 Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Cell Phone
  5. C1150
  6. Service manual
LG C1150 Service Manual

LG C1150 Service Manual

Hide thumbs Also See for C1150:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Service Manual
C1150
Date: October, 2005 / Issue 1.0

Advertisement

Table of Contents
loading

Related Manuals for LG C1150

Summary of Contents for LG C1150

  • Page 1 Service Manual C1150 Date: October, 2005 / Issue 1.0...

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ........5 4.14 Indicator LED Trouble ......87 4.15 RTC Trouble ........88 1.1 Purpose........... 5 1.2 Regulatory Information......5 5. DOWNLOAD AND CALIBRATION 89 1.3 Abbreviations .......... 7 5.1 Download ..........89 5.2 Calibration..........96 2.

  • Page 4: Introduction

    1. Introduction 1. Introduction 1.1. Purpose This manual provides the information necessary to repair, calibration, description and download the features of this model. 1.2. Regulatory Information A. Security Toll fraud, the unauthorized use of telecommunications system by an unauthorized part (for example, persons other than your company’s employees, agents, subcontractors, or person working on your company’s behalf) can result in substantial additional charges for your telecommunications services.
  • Page 5 1. Introduction E. Notice of Radiated Emissions This model complies with rules regarding radiation and radio frequency emission as defined by local regulatory agencies. In accordance with these agencies, you may be required to provide information such as the following to the end user. F.

  • Page 6: Abbreviations

    1. Introduction 1.3 Abbreviations For the purposes of this manual, following abbreviations apply: Automatic Power Control Baseband Bit Error Ratio CC-CV Constant Current °© Constant Voltage Digital to Analog Converter Digital Communication System dB relative to 1 milli watt Digital Signal Processing EEPROM Electrical Erasable Programmable Read-Only Memory Electrostatic Discharge...
  • Page 7 1. Introduction Programmable Gain Amplifier Phase Locked Loop PSTN Public Switched Telephone Network Radio Frequency Receiving Loudness Rating Root Mean Square Real Time Clock Front End Module Surface Acoustic Wave Subscriber Identity Module Sending Loudness Rating SRAM Static Random Access Memory PSRAM Pseudo SRAM STMR...

  • Page 8: Performance

    2. PERFORMANCE 2. PERFORMANCE 2.1 H/W Features Item Feature Comment Li-Polymer : 760 mAh Cell Size : 34(W) × 42.5(H) × 4.45(T) [mm] Standard Battery Cell Weight : 13.5 g Under the minimum current consumption environment Stand by Current (such as paging period 9), the level of standby current is below 4mA.

  • Page 9: Technical Specification

    2. PERFORMANCE 2.2 Technical Specification Item Description Specification TX: 890 + n × 0.2 MHz RX: 935 + n × 0.2 MHz (n=1~124) EGSM Frequency Band TX: 890 + (n-1024) × 0.2 MHz RX: 935 + (n-1024) × 0.2 MHz (n=975~1024) TX: 1710 + (n-512) ×...
  • Page 10 2. PERFORMANCE Item Description Specification GSM, EGSM Offset from Carrier (kHz). Max. dBc +0.5 600 ~ 1,200 1,200 ~ 1,800 1,800 ~ 3,000 3,000 ~ 6,000 Output RF Spectrum 6,000 (due to modulation) Offset from Carrier (kHz). Max. dBc +0.5 600 ~ 1,200 1,200 ~ 1,800 1,800 ~ 3,000...
  • Page 11 2. PERFORMANCE Item Description Specification Offset from Carrier (kHz). Max. dBm Output RF Spectrum (due to switching transient) 1,200 1,800 Spurious Emissions Conduction, Emission Status GSM, EGSM BER (Class II) < 2.439% @-102 dBm Bit Error Ratio BER (Class II) < 2.439% @-100 dBm RX Level Report Accuracy 3 dB 8 3 dB...
  • Page 12 2. PERFORMANCE Item Description Specification STMR 13 5 dB Stability Margin > 6 dB dB to ARL (dB) Level Ratio (dB) 17.5 22.5 30.7 Distortion 33.3 33.7 31.7 25.5 Side Tone Distortion Three stage distortion < 10% System frequency 2.5ppm (13 MHz) tolerance 32.768KHz tolerance 30ppm...
  • Page 13 2. PERFORMANCE Item Description Specification Forced shut down Voltage 3.35 0.03V Standard Voltage = 3.7 V Battery Type Battery full charge voltage = 4.2 V Capacity: 760mAh Switching-mode charger Travel Charger Input: 100 ~ 240 V, 50/60 Hz Output: 5.2 V, 800 mA - 14 -...

  • Page 14: Technical Brief

    3. TECHNICAL BRIEF 3. TECHNICAL BRIEF 3.1 Transceiver (SI4205, U301) The RF parts consist of a transmitter part, a receiver part, a frequency synthesizer part, a voltage supply part, and a VCTCXO part. The Aero I transceiver is the integrated RF front end for multi-band GSM/GPRS digital cellular handsets and wireless data modems.
  • Page 15 3. TECHNICAL BRIEF (1) Receiver Part The Aero I transceiver uses a low-IF receiver architecture which allows for the on chip integration of the channel selection filters, eliminating the external RF image reject filters and the IF SAW filter required in conventional superheterodyne architectures. A.
  • Page 16 3. TECHNICAL BRIEF Figure. 3-2 SI4205 RECEIVER PART B. Intermediate frequency (IF) and Demodulation A quadrature image-reject mixer downconverts the RF signal to a 100KHz intermediate frequency (IF) with the RFLO from the frequency synthesizer. The RFLO frequency is between 1737.8 to 1989.9 MHz, and is internally divided by 2 for GSM 850 and E-GSM 900 modes.
  • Page 17 3. TECHNICAL BRIEF (2) Transmitter Part The transmit (Tx) section consists of an I/Q baseband upconverter, and offset phase-locked loop (OPLL) and two output buffers that can drive external power amplifiers (PA), one for the GSM 850 (824-849 MHz) and E-GSM 900 (880-915 MHz) bands and one for the DCS 1800 (1710-1785 MHz) and PCS 1900 (1850-1910MHz) bands.
  • Page 18 3. TECHNICAL BRIEF B. OPLL The OPLL consists of a feedback mixer, a phase detector, a loop filter, and a fully integrated TXVCO. The TXVCO is centered between the DCS 1800 and PCS 1900 bands, and its output is divided by 2 for the GSM 850 and E-GSM 900 bands.
  • Page 19 3. TECHNICAL BRIEF (3) Frequency Synthesizer Figure. 3-4 SI4205 FREQUENCY SYNTHESIZER PART The Aero I transceiver integrates two complete PLLs including VCOs, varactors, resonators, loop filters, reference and VCO dividers, and phase detectors. The RF PLL uses two multiplexed VCOs. The RF1 VCO is used for receive mode, and the RF2 VCO is used for transmit mode.

  • Page 20: Power Amplifier Module

    3. TECHNICAL BRIEF 3.2 Power Amplifier Module (SKY77325, U302) The SKY77325 Power Amplifier Module (PAM) is designed in a low profile (1.2 mm), compact form factor for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900 operation. The PAM also supports Class 12 General Packet Radio Service (GPRS) multi-slot operation. The module consists of separate GSM850/900 PA and DCS1800/PCS1900 PA blocks, impedance- matching circuitry for 50 input and output impedances, and a Power Amplifier Control (PAC) block with an internal current-sense resistor.

  • Page 21: 13 Mhz Clock

    3. TECHNICAL BRIEF 3.3 13 MHz Clock (VCTCXO, X301) The 13 MHz clock(X301) consists of a TCXO(Temperature Compensated Crystal Oscillator) which oscillates at a frequency of 13 MHz. It is used within the Si4205, analog base band chipset (U102, AD6537B), digital base band chipset (U101, AD6525), and MIDI (U401) chipset. Figure 3-6 VCTCXO CIRCUIT DIAGRAM VVCXO X301...

  • Page 22: Digital Main Processor

    3. TECHNICAL BRIEF 3.5 Digital Main Processor (AD6525, U101) AD6537B Figure 3-8. SYSTEM INTERCONECTION OF AD6525 EXTERNAL INTERFACE - 23 -...
  • Page 23 3. TECHNICAL BRIEF • AD6525 is an ADI designed processor. • AD6537B consists of 1. BUS arbitration Subsystem • EBUS, RBUS, PBUS, SBUS, DMABUS, IOBUS 2. DSP Subsystem • ADI DSP, Viterbi coprocessor, Ciphering unit, Cache memory/controller system 3. MCU Subsystem •...
  • Page 24 3. TECHNICAL BRIEF 3.5.1 Interconnection with external devices A. RTC block interface Countered by external X-TAL The X-TAL oscillates 32.768KHz B. LCD module interface The LCD module is controlled by DBB chipset, AD6525. When LCD operate, the AD6525 controls the LCD module through LCD_CS, LCD_RESET, ADD01, WR, DATA[00-15].
  • Page 25 3. TECHNICAL BRIEF C. RF interface The AD6525 control RF parts through PA_BAND, ANT_SW1, ANT_SW2, CLKON , PA_EN, S_EN, S_DATA, S_CLK, RF_PWR_DWN Table 3-4. RF CONTROL SIGNALS DISCRIPTION Signal Name Description Reset PA_BAND PAM Band Select ANT_SW1 Antenna switch Band Select ANT_SW2 Antenna switch Band Select CLKON...
  • Page 26 3. TECHNICAL BRIEF Figure 3-9. SIM CIRCUIT VSIM GPIO_22 GPIO_23 GPIO_24 20K R144 SIMCLK SIMDATAOP SIM_DATA VSIM AD6525 C172 0.1u VSIM C173 220n J101 SIM_DATA VA165 KCN-ET-0-0048 C174 C175 1000p E. Key interface Include 5 column and 5 row. The AD6525 detect key press by interrupt. - 27 -...
  • Page 27 3. TECHNICAL BRIEF 3.5.2 AD6527 Architecture Figure 3-10. AD6525 INTERNAL ARCHITECTURE AD6525 Serial Link Subsystem AD6537B DSP BUS EBUS DMA and BUS PBUS RBUS ARBITRARION SBUS Peripheral SRAM FLASH Subsystem Subsystem ® (ARM7TDMI RF-Control The internal architecture of AD6525 is shown in Figure 3-10. AD6525 regroups three main subsystems connected together through a dynamic and flexible communication bys network.

  • Page 28: Analog Main & Power Management Processor

    3. TECHNICAL BRIEF 3.6 Analog Main & Power Management Processor (AD6537B, U102) Figure 3-11. AD6537B FUNCTIONAL BLOCK DIAGRAM AD6525 AD6526 - 29 -...
  • Page 29 3. TECHNICAL BRIEF • AD6537B is an ADI designed processor. • AD6537B consists of 1. BB Transmit section • This section generates in-phase and quadrature BB modulated GMSK signals. • Digital GMSK modulator, 10-bit DACs, Reconstruction Filter 2. BB Receive section •...
  • Page 30 3. TECHNICAL BRIEF 3.6.1 Baseband Transmit Section 1. The AD6537B Baseband Transmit Section is designed to support GMSK for both single- slot and multi-slot application. 2.The transmit channel consists of a digital GMSK modulator, a matched pair of 10-bit DACs and a matched pair of reconstruction filter Figure 3-12.
  • Page 31 3. TECHNICAL BRIEF 3.6.3 Auxiliary Section 1. This section includes an Automatic Frequency Control(AFC) DAC, voltage reference buffers, an Auxiliary ADC, and light controllers. 2. This section also contains AUX ADC and Voltage Reference • AFC DAC: 13 bits • IDAC: 10 bits •...
  • Page 32 3. TECHNICAL BRIEF 3.6.4 Audio Section 1. Receive audio signal from microphone. C1150 use differential configuration. 2. Send audio signal to speaker. C1150 use differential configuration. 3. This section provides an audio codec with a digital-to-analog converter and an analog-to- digital converter, a ring tone volume controller, a microphone interface, and multiple analog input and output channels.
  • Page 33 2.2K CLOSE TO EARJACK C164 R142 R143 VIN- R146 R145 VA153 JACK_DET R147 VA154 VIN+ C165 C166 HEADSET JACK C167 C168 C169 C170 C171 100p 100p U104 R148 330K SP114 SP115 LMV7291MGX-NOPB Figure 3-16. C1150 AUDIO CIRCUIT - 34 -...

  • Page 34: Power Management

    3. TECHNICAL BRIEF 3.6.5 Power Management Figure 3-17. AD6537B POWER MANAGEMENT SECTION 1. Power up sequence logic 1. The AD6537B controls power on sequence 2. Power on sequence - If a battery is inserted, the battery powers the 8 LDOs. - Then if PWRONKEY is detected, the LDOs output turn on.
  • Page 35 3. TECHNICAL BRIEF AD6537B VCORE Enable Digital core THERM Thermal LDO Regulator Mode Shutdown DDLO Enable Memory Interface VMEM UVLO LDO Regulator Mode CHGDET Enable VEXT External Interface VBAT LDO Regulator KEYON Mode VSMEn Enable Control Bit SIM Interface VRTC LDO Regulator Mode DBBON...
  • Page 36 3. TECHNICAL BRIEF Table 3-6. AD6537B LDO DESCRIPTION Description VSIM 2.85V(is provided to SIM card) VCORE 1.8V(is provided to the AD6525 & AD6537B’s digital core) VRTC 1.8V(is provided to the RTC and Backup Battery) VMIC 2.55V(is provided to the AD6525 I/O and used as microphone bias) VTCXO 2.75V(is provided to VCTCXO) VMEM...
  • Page 37 3. TECHNICAL BRIEF 3. Battery Charging Block 1. It can be used to charge Lithium Ion and/or Nickel Metal Hydride batteries. Charger initialization, trickle charging, and Li-Ion charging control are implemented in hardware. 2. Charging Process - Check charger is inserted or not - If AD6537B detects that Charger is inserted, the CC-CV charging starts.
  • Page 38 3. TECHNICAL BRIEF VCHARGE VBAT AD6537B VBAT C122 CUS02 R107 Current Sense D101 R108 VCHG ISENSE R109 CLOSE TO BATTERY PACK GATEDRIVE KEYOUT KEY_ROW0 R110 Q103 KEYON KB101 PWR KEY C123 REFBB TPCF8102-TE85L-F VBAT VCHARGE NC_T12 NC_R1 VREF NC_A16 C134 1u NC_C16 C109 R101...

  • Page 39: Memory

    3. TECHNICAL BRIEF 3.7 Memory (TH50VPF5783AASB, U201) Vccf A-1 A0~A21 A-1 A0~A21 DQ0~DQ15 (DQ0~DQ7) WP/ACC 128 Mbits RESET FLASH Memory CEf1 CEf2 RY/BYf BYTE DQ0~DQ15 Vccps A0~A20 32 Mbits PSEUDO SRAM DQ0~DQ15 CE1ps CE2ps Figure 3-21. MEMORY BLOCK DIAGRAM • 128Mbit flash memory + 32Mbit PSRAM •...

  • Page 40: Display And Interface

    White LED Backlight Table 3-6. LCD MODULE DISCRIPTION C1150 Main LCD supports one 65,536 color LCD module. There are the control signals : LCD_CS (This acts as the chip select enable for the LCD Driver), WR, ADD01(RS) and LCD_RESET. DATA[00:15] pins to send data for displaying graphical text onto the LCD.

  • Page 41: Keypad Switches And Scanning

    SP211 SP212 SP213 KB18 KB11 KB14 RIGHT SEND KEY_ROW3 SP226 SP227 SP228 SP229 SP230 KB19 KB12 KB15 DOWN CONFIRM KEY_ROW4 SP231 SP232 SP233 SP234 SP235 R240 R241 KEY_COL0 KEY_COL1 KEY_COL2 KEY_COL3 KEY_COL4 Figure 3-23. C1150 KEYPAD CIRCUIT - 42 -...

  • Page 42: Microphone

    3. TECHNICAL BRIEF 3.10 Microphone The microphone is placed to the front cover and contacted to main PCB. The audio signal is passed to AIN1P and AIN1N pins of AD6537B. The voltage supply VMIC is output from AD6537B, and is a bias voltage for the AIN1P. The AIN1P and AIN1N signals are then A/D converted by the Voiceband ADC part of AD6537B.

  • Page 43: Main Receiver

    3. TECHNICAL BRIEF 3.11 Main Receiver The Receiver is driven directly from AD6537B AOUT1P and AOUT1N pins and the gain is controlled by the PGA in an AD6537B. The Receiver is placed in the folder cover and contacted to LCD MODULE VBAT C402 U402...

  • Page 44: Headset Jack Interface

    3. TECHNICAL BRIEF 3.12 Headset Jack Interface This phone chooses a 3-pole type ear-mic jack which has three electrodes such as Receiver +, Mic+, and GND. This type usually supports only single-ended configuration in the audio path. But most of phones use the common interface. VMIC AD6537B R152...

  • Page 45: Speaker & Midi Ic

    3. TECHNICAL BRIEF 3.13 Speaker & MIDI IC C1150 don’t use buzzer. but uses the loud speaker and Melody IC which makes the robust joyful melody sounds. • Melody IC control 2GPIO are assigned to control melody IC. Melody data is transferred to melody IC.

  • Page 46: Key Back-Light Illumination

    3. TECHNICAL BRIEF 3.14 Key Back-light Illumination In key back-light illumination, there are 10 blue LEDs on main PCB keypad side , which are driven by LIGHT3 line from AD6537B. LCD MODULE GREEN LED R201 GLED R202 RLED RED LED R204 R205 NA Q201...
  • Page 47 3. TECHNICAL BRIEF 3.15 LCD Back-light Illumination In LCD Back-light illumination, there is an charge pump driver in main PCB, which is controlled by LCD_DIM line from AD6525. LCD MODULE VBAT U203 C211 C212 C213 LCD BACKLIGHT LED C214 C215 LCD_DIM EN_SET VA207...

  • Page 48: Motor

    3. TECHNICAL BRIEF 3.16 MOTOR The Vibrator is placed in the folder cover and contacted to LCD MODULE. The vibrator is driven from VIBRATOR (GPIO_0) of AD6525. VBAT VBAT R210 R211 47K R213 220 Q202 R214 1.5K VIBRATOR R215 100K MOTOR EMZ2 VA204...

  • Page 49: Trouble Shooting

    4. TROUBLE SHOOTING 4. TROUBLE SHOOTING 4.1 RX Trouble Test Point Test Points ➃ ➄ ➂ ➀ ➁ ➅ RX Check Area Checking Flow START HP8922 : Test mode 62 CH, 7 level setting (TCH) 62 CH, -60dBm setting (BCCH) Spectrum analyzer setting Oscilloscope setting 1.
  • Page 50 4. TROUBLE SHOOTING (1) Checking Regulator Circuit Test Points U303. 5 U303. 3 Figure 4-2 Circuit Diagram VBAT MIC5255-2.85BM5 U303 C343 C344 CLKON 0.01u C345 4.7u Checking Flow Check Pin 5. RF 2.85V O.K? Changing the Board Pin 3. High ? Regulator Circuit is OK Replace U303 See next Page to check...
  • Page 51 4. TROUBLE SHOOTING (2) Checking VCTCXO Circuit Test Points Checking Flow VCTCXO Circuit is OK Check Pin 3. See next Page to check 13 MHzO.K? ANT SW & Mobile SW Refer to Graph 2-1 Changing X301 Check Pin 4. 2.75V OK? Refer to Graph 2-2 Check U101, PMIC X301.
  • Page 52 4. TROUBLE SHOOTING (3) Checking PLL Control Signal Test Points S_DATA S_CLK S_EN RF_PWR_DWN Figure 4-4. Checking Flow Check TP 401. Download the SW Lev el i s High? Check S_DATA, S_CLK, S_EN. Download the SW Simil ar? Check if there is Any Major Difference Refer to Graph 3-1 Control Signal is OK...
  • Page 53 4. TROUBLE SHOOTING (4) Checking Ant SW & Mobile SW Test Points SW 301. A N T SW 301. RF L306 (VC1 ) FL301. 1 L304 (VC2 ) FL301. 10 Figure 4-5 Waveform Circuit Diagram KMS-506 SW301 C312 C316 FL301 GND1 GND2 EGSM_TX...
  • Page 54 4. TROUBLE SHOOTING Checking Flow For these 2 test case, No Call connection is needed Check SW301 Pin ANT,RF Open Changing SW301 with RF Cable connected. Check SW301 Pin ANT,RF Short Changing SW301 with No RF Cable Connected Check L304, L306 Check whether Ant SW VC1 :Low Changing the Board.
  • Page 55 4. TROUBLE SHOOTING (5) Checking SAW Filter Circuit Test Points Circuit Diagram FL302 FL303 C327 FL302 L303 27nH EFCH942MTCA7 C328 C329 FL303 L305 6.8nH EFCH1842TCA7 C331 Figure 4-6 Checking Flow Check RF Level of FL302.1 : ~ -61dBm Changing Saw Filter Input FL303.1 : ~ -61dBm C326for GSM For GSM : FL302.1...
  • Page 56 4. TROUBLE SHOOTING (6) Checking RX IQ Test Points Circuit Diagram C323 C325 C323 C325 Figure 4-7 Waveform Graph 4-4 Checking Flow Check C323, C325. Replace U301 Similar? Check if there is Any Major Di ffer ence Refer to Graph 4-4 Redownload the Software And calibrate - 57 -...

  • Page 57: Tx Trouble

    4. TROUBLE SHOOTING 4.2 TX Trouble Test Points ➅ Test Points ➄ ➂ ➀ ➁ ➃ T X Check Area Figure 4-8 Checking Flow START HP8922 : Test mode 62 CH, 7 level setting (TCH) 62 CH, -60dBm setting (BCCH) Spectrum analyzer setting Oscilloscope setting 1.
  • Page 58 4. TROUBLE SHOOTING (1) Checking Regulator Circuit Test Points U303. 5 U303 . 3 Figure 4-9 Circuit Diagram VBAT MIC5255-2.85BM5 U303 C343 C344 CLKON 0.01u C345 4.7u Checking Flow Check Pin 5. RF 2.85VO.K? Changing the Board Pin 3.High ? Regulator Circuit is OK Replace U303 See next Page to check...
  • Page 59 4. TROUBLE SHOOTING (3) Checking Ant SW & Mobile SW Test Points Checking Flow VCTCXO Circuit is OK Check Pin 3. 13 MHzO.K? See next Page to check Refer to Graph 2-11 ANT SW & Mobile SW Changing X301 2.75V OK? Check Pin 4.
  • Page 60 4. TROUBLE SHOOTING (3) Checking PLL Control Signal Test Points S_DATA S_CLK S_EN RF_PWR_DWN Figure 4-11 Checking Flow Check TP 401. Download the SW Lev el i s High? Download the SW Simil ar? Control Signal is OK See next Page to check ANT SW &...
  • Page 61 4. TROUBLE SHOOTING (4) Checking Ant SW & Mobile SW Test Points Circuit Diagram KMS-506 SW301 SW301. ANT SW301. RF C312 C316 FL301 FL301. 5 L306 (VC1) GND1 GND2 EGSM_TX GND3 DCS_TX FL301. 3 GND4 GND5 GND6 EGSM_RX C346 GND7 DCS_RX 11 2 SHS-C090DR...
  • Page 62 4. TROUBLE SHOOTING (4) Checking Ant SW & Mobile SW Checking Flow For the test, TX Stand alone Mode is needed. Refer to chapter 11 (PL=7 for GSM, PL=2 for DCS) Check L304, L306 Check whether Ant SW Set as TX mode Check VC1, VC2 Changing board Refer to Graph 4-7(a),4-7(b)
  • Page 63 4. TROUBLE SHOOTING (5) Checking PAM Control Signal Test Points PA_EN (R302) TX_RAMP (R309) Figure 4-1 Waveform TX_RAMP PAM_EN Graph 4-8 Checking Flow Check TX_RAMP and PA_EN Check if there is Simil ar? Download S/W Any Major Diff erenc e or not Refer to Graph 5-11 Go to Next Step - 64 -...
  • Page 64 4. TROUBLE SHOOTING (6) Checking TX IQ Test Points C323 C325 Waveform Graph 4-9 Circuit Diagram C321 1000p 13MHZ C323 C325 RXQN RXIP RXIN TXIP TXIN TXQP TXQN - 65 -...

  • Page 65: Power On Trouble

    4. TROUBLE SHOOTING 4.3 Power On Trouble Circuit Diagram & Test Points VSIM VVCXO VMIC VRTC VCORE VMEM VEXT C101 VBAT C102 C103 C104 C105 C106 C107 C108 C113 0.1u C117 C118 C119 For AD6535 & 6537B VBAT VBAT VBAT_NET VRTC AK6537B VBATSENSE...
  • Page 66 4. TROUBLE SHOOTING Checking Flow START Check Charge or C hange B attery and t ry again. Battery Voltage > 3.35 Push power-on key and check Check the contact of power-key or d ome swi tch. the level change of U102 KEYON Check the voltage of the following port at U102 VOORE=1.8V ?

  • Page 67: Charging Trouble

    4. TROUBLE SHOOTING 4.4 Charging Trouble Test Points D101 R108 Q103 Figure 4-16 Circuit Diagram VCHARGE VBAT VBAT C122 CUS02 R107 Current Sense D101 R108 VCHG ISENSE R109 CLOSE TO BATTERY PACK GATEDRIVE KEYOUT KEY_ROW0 R110 Q103 KEYON KB101 PWR KEY REFBB TPCF8102-TE85L-F NC_T12...
  • Page 68 4. TROUBLE SHOOTING Checking Flow SETTING : Connect the battery and the charging adaptor (TA) to the phone START Voltage at VCHG The charging adapt or(TA) is ou t of order (A5 pin of U102) Change the chargi ng adaptor. =5.2V ? R108, Q103, D101 Resolder R108, Q103, D101.

  • Page 69: Lcd Trouble

    4. TROUBLE SHOOTING 4.5 LCD Trouble. Checking Flow If the FPCB h as a pr oble m, the contr ol s igna ls for LCD c annot be tr ansmitte d pr ope rly. Figure 4-17(b) connection Check Figure 4-17(a) CN201 Figure 4-17(c) - 70 -...
  • Page 70 4. TROUBLE SHOOTING Checking Flow START Is the connection of LCD Reassem bl e LCD m odul e wi th LCD connector. module with LCD connector on PCB OK? Check the soldering Resol der CN201. of CN201 Check the soldering of Resol der connector.

  • Page 71: Receiver Trouble

    4. TROUBLE SHOOTING 4.6 Receiver Trouble Test Points Speaker vibrator & Receiver R407 R408 Soldering R409 check Figure 4-18 Circuit Diagram VBAT C402 U402 LMS4684ITLX SPK_RCV_SEL AD6537B COM1 SPK_REC_P COM2 C408 R407 100K SPK_REC_N R408 RECP AOUT1P RECP R409 RECN RECN AOUT1N Audio Path...
  • Page 72 4. TROUBLE SHOOTING Checking Flow SETTING : After initialize Agilent 8960, Test EGSM, DCS mode START Check the signal level of Check the soldering Replace the Main board. RCVP & RCVN at R408, R409. Are R408 & R409 ABB is out of order. these voltage is about 1.2V? Re-soldering R408, R409...

  • Page 73: Speaker Trouble

    4. TROUBLE SHOOTING 4.7 Speaker Trouble Test Points speaker vibrator R402 C403 CN201 U401 Soldering C408 check Figure 4-19 Circuit Diagram These five components make up the amplifier and the filter stage of melody. [C401, R402, C403, R404]] VMEM Analog switch for select audio path or midi path. U401 YMU759B R401...
  • Page 74 4. TROUBLE SHOOTING Checking Flow SETTING : Connect PIF to the phone, and Power on. Enter the engineering mode, and set "Melody on" at Buzzer of BB test menu. START Replace U102 Voltage across C409 ( ABB LDO) > 3.3 V? Check the signal level of Replace U401 C406,C407...

  • Page 75: Mic Trouble

    4. TROUBLE SHOOTING 4.8 MIC Trouble Test Points R123 Soldering check R130 MIC101 Figure 4-20 Circuit Diagram R123 C140 The signal flow of the C141 R125 2.2K microphone to ABB AIN2P MIC101 AIN2N R127 CLOSE TO MIC AIN1P C144 AIN1N C145 C146 AIN3L...
  • Page 76 4. TROUBLE SHOOTING Checking Flow SETTING : After initialize Agilent 8960, Test EGSM, DCS mode START Voltage VMIC of U102 Voltage across C141 Replace U102. = 2.5VDC? = 2.5VDC? MIC Bias Voltage Resolder R123 & R125. Check the signal level at each side of MIC101.

  • Page 77: Vibrator Trouble

    4. TROUBLE SHOOTING 4.9 Vibrator Trouble Test Points R210 Q202 R211 R215 R213 Vibrator Soldering Check in LCD Module Figure 4-21(b) Figure 4-21(a) Circuit Diagram VBAT VBAT R210 R211 47K R213 220 When the vibrator works, the Q202 signal at this point goes H From the vibrator at LCD R214 1.5K VIBRATOR...
  • Page 78 4. TROUBLE SHOOTING Checking Flow SETTING : After Initialize Agilent 8960, Test in EGSM, Connect PIF to the phone, and Power on. Enter The engineering mode, and set ‘Vibrator on’ at Vibration of BB test menu. START Is the voltage at pin 6 Check the soldering of R223.

  • Page 79: Key Backlight Led Trouble

    4. TROUBLE SHOOTING 4.10 Key Backlight LED Trouble Test Points Circuit Diagram To LIGHT3 port of ABB C124 C125 C126 C127 C128 C129 C130 C131 C132 C133 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u VBAT R111 R112 R113 R114 R115...

  • Page 80: Folder On/Off Trouble

    4. TROUBLE SHOOTING 4.11 Folder on/off Trouble Test Points U103 C 158 Figure 4-2 Circuit Diagram The voltage at this point goes from 2.8V to 0 V when the folder is closed. GPIO_2 VEXT GPIO_3 GPIO_4 GPIO_5 R134 MIDI_INT GPIO_6 C158 GPIO_7 0.1u...
  • Page 81 4. TROUBLE SHOOTING Checking Flow START Check the magnet Place the m agnet properl y. in the folder side. Voltage Voltage VEXT of at Pin 6 of U103 Repl ace U102. U102 =2.8V? = 2.8V ? Resol der U103. Open Folder. Voltage at Pin 1 of U103 Resol der R142 &...

  • Page 82: Sim Detect Trouble

    4. TROUBLE SHOOTING 4.12 SIM Detect Trouble SETTING : Insert SIM into J101, connect PIF to the Phone, and Power on. Test Points Circuit Diagram VSIM GPIO_22 GPIO_23 GPIO_24 20K R144 SIMCLK SIMDATAOP SIM_DATA VSIM C172 0.1u VSIM C173 220n J101 Pin 1 SIM_DATA...

  • Page 83: Earphone Trouble

    4. TROUBLE SHOOTING 4.13 Earphone Trouble U105 J102 U102 Figure 4-25(a) Figure 4-25(b) Circuit Diagram TEMP1 VMIC TEMP2 AUXADC1 AUXADC2 The direction of the audio R152 signal from the ear-mic HOOK_DET VMEM ➝ VMIC SWITCHING AIN2P R126 C143 0.1u When Jack is activated AIN2N AIN1P AIN1N...
  • Page 84 4. TROUBLE SHOOTING Checking Flow START Insert the earphone to the phone. Earphone detect problem Does the audio profile of the phone change to the earphone mode? Audio path problem Set the audio part of the test equipment to echo mode. Earphone receiving path Set the audio part of the test problem...
  • Page 85 4. TROUBLE SHOOTING Earphone detect problem Earphone detect problem Voltage at R1460 Voltage at Pin1 of U104 = 2.8V ? =2.8V? Resol der R146. Voltage at Pin 3 of U104 Resol der R145, R147, R148 > Voltage at Pin 4 of U104? Resol der or repl ace U104.

  • Page 86: Indicator Led Trouble

    4. TROUBLE SHOOTING 4.14 Indicator LED Trouble Test Points Q201 R201 Figure 4-26 Circuit Diagram CN201 GREEN LED R201 GLED R202 RLED RED LED R204 R205 NA Q201 R206 R207 IND_LEDG RED_LED R208 R209 UMX1NTN Checking Flow START VBAT of U102 is 3.6~4.2V? Check the V BAT of U102.

  • Page 87: Rtc Trouble

    4. TROUBLE SHOOTING 4.15 RTC Trouble R124 Test Points X101 Figure 4-27 Circuit Diagram AD6525 C176 PWRON CLKON CLKON X101 R124 13MHZ CLKIN OSCOUT OSCIN 32.768KHz C142 RESET MC-146_7pF Checking Flow START Is the voltage level at R124 Check the sol deri ng of R123. about 1.8V? Repl ace X101 and try agai n.

  • Page 88: Download And Calibration

    5. DOWNLOAD AND CALIBRATION 5. DOWNLOAD AND CALIBRATION 5.1 Download A. Download Setup Figure 5-1 describes Download setup UART (If you have battery, no TA is needed) Figure 5-1. Download Setup - 89 -...
  • Page 89 5. DOWNLOAD AND CALIBRATION B. Download Procedure 1. Access Flash loader program in PC and select Erase.(Don’t check OWCD) 1. Select Erase 2. Check 3. Donít Check OWCD 2. Press Start and Wait until Erase is completed. 1. Press Start and Wait - 90 -...
  • Page 90 5. DOWNLOAD AND CALIBRATION 3. Change Address and Size(Address : 18000000, Size : 0x800000), and Press Start and Wait until Erase is completed again. 1. Change Address and Size 3. Press Start and 2. Donít Check Wait OWCD 4. Press Write to start Download and press Key to choose software (AlchemyData.mot) 1.
  • Page 91 5. DOWNLOAD AND CALIBRATION 5. Choose software 1. Select File 2. Press Open 6. Wait until converting from MOT to BIF is completed(Don’t check OWCD) 2. Wait until completion 1. Donít Check OWCD - 92 -...
  • Page 92 5. DOWNLOAD AND CALIBRATION 7. Press Start and Power on the phone using JIG remote Power on(Switch 1) 1. Press Start 2. Turn on Switch VBA T 8. Wait until Sending Block is completed 1. Wait Until Sending Block is completed - 93 -...
  • Page 93 5. DOWNLOAD AND CALIBRATION 9. Press Write to start Download and press Key to choose software(CodeData.mot) 1. Press 2. Press 10. Choose software 1. Press Start 2. Turn on Switch VBAT - 94 -...
  • Page 94 5. DOWNLOAD AND CALIBRATION 11. Wait until Sending Block is completed 1. Wait Until Sending Block is completed - 95 -...

  • Page 95: Calibration

    5. DOWNLOAD AND CALIBRATION 5.2 Calibration A. Equipment List Table 5-1. Calibration Equipment List. Equipment for Calibration Type / Model Brand Wireless Communication Test Set HP-8960 Agilent RS-232 Cable and Test JIG RF Cable Power Supply HP-66311B Agilent GPIO interface card HP-GPIB Agilent Calibration &...
  • Page 96 5. DOWNLOAD AND CALIBRATION JTAG2 JTAG1 Status ADI-REMOTE TI-REMOTE POWER VBAT UART Status POWER Figure 5-3. The top view of Test JIG C. Test Jig Operation Table 5-2. Jig Power Power Source Description Power Supply Usually 4.0V Travel Adaptor Use TA, name is TA-20G(24pin) Table 5-3.
  • Page 97 5. DOWNLOAD AND CALIBRATION Table 5-4. LED Description LED Number Name Description LED 1 Power Power is provided for Test Jig LED 2 Indicate charging state of the phone battery LED 3 UART Indicate data transfer state through the UART port LED 4 Indicate data transfer state through the MON port 1.

  • Page 98: Block Diagram

    6. BLOCK DIAGRAM 6. BLOCK DIAGRAM Speaker & Motor Receiver LCD Panel 128X128 Connector Indicate LED (2 Color) Backup Battery Board to Board Connector Ear Jack Connector YNU762 MIDI (AD6537B) Charging (AD6525) Connector Flash Memory Battery IO Connector - 99 -...
  • Page 99 Note - 100 -...

  • Page 100: Circuit Diagram

    2005 KIM K.S. DRAWING Athena, Typhoon, Audio NAME 07/04 Approved NO S.Y. YAMAHA CHIP SIM_DATA 2005 SOFTWARE MIDI VA165 KCN-ET-0-0048 C174 C175 DRAWING 1000p Iss. Notice No. Date Name VER_1.1 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 101 -...
  • Page 101 SONG Y.S. Checked 2005 KIM K.S. DRAWING Memory, Key, I/O, LCD Interface NAME KEY_COL0 07/04 Approved NO S.Y. KEY_COL1 2005 KEY_COL2 KEY_COL3 KEY_COL4 DRAWING Iss. Notice No. Date Name VER_1.1 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 102 -...
  • Page 102 4.7u MODEL 07/04 C1150 Designer LEE S.Y. 2005 07/04 KIM K.S. Checked 2005 SONG Y.S. DRAWING RF(AERO1) NAME 07/04 Approved NO S.Y. 2005 DRAWING Iss. Notice No. Date Name VER_1.1 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 103 -...
  • Page 103 Sheet/Sheets C1150 07/04 MODEL LEE S.Y. Designer 2005 07/04 SONG Y.S Checked 2005 KIM K.S. DRAWING MIDI NAME 07/04 Approved NO S.Y. 2005 DRAWING Iss. Notice No. Date Name VER_1.1 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 104 -...

  • Page 104: Pcb Layout

    8. PCB LAYOUT 8. PCB LAYOUT - 105 -...
  • Page 105 8. PCB LAYOUT - 106 -...

  • Page 106: Engineering Mode

    9. ENGINEERING MODE 9. ENGINEERING MODE 9. ENGINEERING MODE A. About Engineering Mode Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided by a handset. B. Access Codes The key sequence for switching the engineering mode on is 2945#*#. Pressing END will switch back to non-engineering mode operation.

  • Page 107: Bb Test

    9. ENGINEERING MODE 9.1 BB Test [MENU 1] Baseband Test 9.1.1 LCD • Contrast value : This menu is to test Main LCD contrast. - Contrast Value [10-50] : Change this value by up and down key. • Sub LCD Contrast : This menu is to test Sub LCD contrast. - Contrast Value [0-50] : Change this value by up and down key.
  • Page 108 9. ENGINEERING MODE 9.1.5 ADC (Analog to Digital Converter) This displays the value of each ADC. • MVBAT ADC : Main Voltage Battery ADC • AUX ADC : Auxiliary ADC • TEMPER ADC : Temperature ADC 9.1.6 BATTERY • Bat Cal : This displays the value of Battery Calibration. The following menus are displayed in order: BAT_LEV_4V, BAT_LEV_3_LIMIT, BAT_LEV_2_LIMIT, BAT_LEV_1_LIMIT, BAT_IDLE_LI MIT, BAT_INCALL_LIMIT, SHUT_DOWN_VOLTAGE, BAT_RECHARGE_LMT •...

  • Page 109: Rf Test

    9. ENGINEERING MODE 9.2 RF Test [MENU 2] Radio Frequency Test 9.2.1 SAR test This menu is to test the Specific Absorption Rate. • SAR test on : Phone continuously process TX only. Call-setup equipment is not required. • SAR test off : TX process off 9.3 MF mode [MENU 3] This manufacturing mode is designed to do the baseband test automatically.

  • Page 110: Trace Option

    10. EXPLODED VIEW & REPLACEMENT PART LIST 9.3.8 MicSpkTest The sound from MIC is recorded for about 3 seconds, then it is replayed on the speaker automatically 9.4 Trace option [MENU 4] This is NOT a necessary menu to be used by neither engineers nor users. 9.5 Call timer [MENU 5] This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.

  • Page 111: Stand Alone Test

    10. STAND ALONE TEST 10. STAND ALONE TEST 10.1 Introduction This manual explains how to examine the status of RX and TX of the model. A. Tx Test TX test - this is to see if the transmitter of the phones is activating normally. B.

  • Page 112: Means Of Test

    10. STAND ALONE TEST 10.3 Means of Test a. Select a COM port b. Set the values in Tx or Rx c. Select band and channel d. After setting them all above, press connect button. e. Press the start button Figure 10-1.
  • Page 113 10. STAND ALONE TEST Figure 10-2. HW test setting Figure 10-3. Ramping profile - 114 -...

  • Page 114: Auto Calibration

    11. AUTO CALIBRATION 11. AUTO CALIBRATION 11.1 Overview Autocal (Auto Calibration) is the PC side Calibration tool that perform Tx ,Rx and Battery Calibration with Agilent 8960(GSM call setting instrument) and Tektronix PS2521G(Programmable power supply). Autocal generate calibration data by communicating with phone and measuring equipment then write it into calibration data block of flash memory in GSM phone.
  • Page 115 11. AUTO CALIBRATION Figure 11-1. Auto Calibration Program > Cable loss : Enter the RF cable loss GSM and DCS Screen Screen > GPIB(Primary address) : Enter the SS(Ag8960) and PS(Tektronix PS2521G) GPIB address Screen > ADC Channel : Default ADC Calibration Channel Screen >...

  • Page 116: Agc

    11. AUTO CALIBRATION 11.4 AGC This procedure is for Rx calibration. In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the result window will show correction values per every power level and gain code and the same measure is performed per every frequency.
  • Page 117 Note - 118 -...

  • Page 118: Exploded View & Replacement Part List

    12. EXPLODED VIEW & REPLACEMENT PART LIST 12. EXPLODED VIEW & REPLACEMENT PART LIST 12.1 EXPLODED VIEW - 119 -...
  • Page 119 Note. - 120 -...

  • Page 120: Replacement Parts

    MCJH00 COVER,FOLDER(LOWER) MCJH0030201 Color MFBC00 FILTER,SPEAKER MFBC0008101 C1300 CGRSV ELLIPSE 0.1t Black MMAA00 MAGNET,SWITCH MMAA0000601 LG-G510,511,512 common use, DIA : 3.0mm+1.5t Silver MPBF00 PAD,FLEXIBLE PCB MPBF0005601 C1300 CGRSV 26 X 5 X 3.5 t Black MPBG00 PAD,LCD MPBG0038001 Black Without...
  • Page 121 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark MGAD01 GASKET,SHIELD FORM MGAD0093801 Gold MICA00 INSERT,FRONT MICA0006001 G7030,M1.4 x L2.5, Outside Diameter 2.0 Yellow MPBZ01 MPBZ0050701 C1300 CGRSV 2.0 X 2.0 X 0.7t Black Without MPBZ02 MPBZ0105101...
  • Page 122 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark MLAK00 LABEL,MODEL MLAK0006901 ADCA00 DOME ASSY,METAL ADCA0017101 C1300 CGRSV D-Dimple 4.9 or 5.0 PI White MGAD00 GASKET,SHIELD FORM MGAD0094701 Gold Without MLAB00 LABEL,A/S MLAB0000601 HUMIDITY STICKER Color Without MLAC00...

  • Page 123: Main Component

    41 PIN,0.3 mm,STRAIGHT , ,0.9t stacking height BOARD RES,CHIP ERHY0000261 10K ohm,1/16W,J,1005,R/TP RES,CHIP ERHY0000280 100K ohm,1/16W,J,1005,R/TP SPCY00 PCB,FLEXIBLE SPCY0060401 POLYI ,0.4 mm,MULTI-4 ,C1150-FPCB-A SBCL00 BATTERY,CELL,LITHIUM SBCL0001303 2 V,1 mAh,COIN ,SOLDER TYPE BACKUP BATTERY SJMY00 VIBRATOR,MOTOR SJMY0002802 3 V,0.08 A,12*15 ,G5300 VIBRATOR (0.5t PAD) SUSY00 SPEAKER...
  • Page 124 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C105 CAP,TANTAL,CHIP ECTH0001901 10 uF,6.3V ,M ,L_ESR ,1608 ,R/TP C106 CAP,TANTAL,CHIP ECTH0001901 10 uF,6.3V ,M ,L_ESR ,1608 ,R/TP C107 CAP,TANTAL,CHIP ECTH0001901 10 uF,6.3V ,M ,L_ESR ,1608 ,R/TP C108 CAP,CERAMIC,CHIP ECCH0000168...
  • Page 125 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C156 CAP,CERAMIC,CHIP ECCH0000120 39 pF,50V,J,NP0,TC,1005,R/TP C160 CAP,CERAMIC,CHIP ECCH0006201 4.7 uF,6.3V ,K ,X5R ,TC ,1608 ,R/TP C161 CAP,CERAMIC,CHIP ECCH0000120 39 pF,50V,J,NP0,TC,1005,R/TP C162 CAP,CERAMIC,CHIP ECCH0000182 0.1 uF,10V ,K ,X5R ,HD ,1005 ,R/TP C163 CAP,CERAMIC,CHIP ECCH0000182...
  • Page 126 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C221 CAP,CERAMIC,CHIP ECCH0000120 39 pF,50V,J,NP0,TC,1005,R/TP C222 CAP,CERAMIC,CHIP ECCH0004903 1 uF,6.3V ,Z ,Y5V ,TC ,1005 ,R/TP C223 CAP,CERAMIC,CHIP ECCH0000120 39 pF,50V,J,NP0,TC,1005,R/TP C224 CAP,CERAMIC,CHIP ECCH0000114 20 pF,50V,J,NP0,TC,1005,R/TP C225 CAP,CERAMIC,CHIP ECCH0000104...
  • Page 127 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C331 CAP,CERAMIC,CHIP ECCH0000102 1 pF,50V ,C ,NP0 ,TC ,1005 ,R/TP C332 CAP,CERAMIC,CHIP ECCH0000159 22 nF,16V,K,X7R,HD,1005,R/TP C333 CAP,CERAMIC,CHIP ECCH0000115 22 pF,50V,J,NP0,TC,1005,R/TP C334 CAP,CERAMIC,CHIP ECCH0000128 100 pF,50V,J,NP0,TC,1005,R/TP C335 CAP,CERAMIC,CHIP ECCH0000143...
  • Page 128 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark FL305 FILTER,EMI/POWER SFEY0007102 SMD ,5.6 V,SMD ,4ch. R-Varistor Array(400Ohm,25pF) FL306 FILTER,EMI/POWER SFEY0007102 SMD ,5.6 V,SMD ,4ch. R-Varistor Array(400Ohm,25pF) FL307 FILTER,EMI/POWER SFEY0007102 SMD ,5.6 V,SMD ,4ch. R-Varistor Array(400Ohm,25pF) FL308 FILTER,EMI/POWER SFEY0007102...
  • Page 129 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R140 RES,CHIP ERHY0000247 2.2K ohm,1/16W,J,1005,R/TP R142 RES,CHIP ERHY0000202 4.7 ohm,1/16W,J,1005,R/TP R143 RES,CHIP ERHY0000202 4.7 ohm,1/16W,J,1005,R/TP R144 RES,CHIP ERHY0000265 20K ohm,1/16W,J,1005,R/TP R149 RES,CHIP ERHY0000280 100K ohm,1/16W,J,1005,R/TP R150 RES,CHIP ERHY0000201...
  • Page 130 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R232 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R233 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R234 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R235 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R237 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R238 RES,CHIP ERHY0000213...
  • Page 131 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark SWITCH,TACT ESCY0002501 12 V,0.05 A,HORIZONTAL ,220 G,G5200 TACK S/W SW301 CONN,RF SWITCH ENWY0002301 ANGLE ,SMD ,0.8 dB, LFBGA ,160 PIN,R/TP ,DIGITAL BASEBAND U101 EUSY0157001 PROCESSOR, Pb Free 148-TERMINAL BGA ,148 PIN,R/TP ,GSM ANALOG U102 EUSY0169301...
  • Page 132 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C127 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C128 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C129 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C130 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C131 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C132 CAP,CERAMIC,CHIP ECCH0000167...
  • Page 133 RES,VARIABLE,ETC ERVZ0000101 Free ohm, PIN, ,SMD ,R/TP ,1005 SIZE CHIP VARISTOR, Pb VA152 RES,VARIABLE,ETC ERVZ0000101 Free SPFY00 PCB,MAIN SPFY0109301 FR-4 ,1.0 mm,BUILD-UP 8 ,C1150 Main PCB open_close 3.8:1_7.0:1 ,-4.0 dBd, ,GSM900/DCS1800 SNGF00 ANTENNA,GSM,FIXED SNGF0009501 INTERNAL PIPA TYPE - 134 -...

  • Page 134: Accessory

    Level Description Part Number Specification Color Remark MHBY00 HANDSTRAP MHBY0001101 Neck Strap 380mm Gray BATTERY PACK,LI- 3.7 V,720 mAh,1 CELL,PRISMATIC ,C1150 BATT(Black), SBPP00 SBPP0013101 Black POLYMER SGDY00 DATA CABLE SGDY0004401 DK-20G, G7000 ,Cable bulk SGEY00 EAR PHONE/EAR MIKE SET SGEY0003203 G4050 G4010 For USA ,3 POLE Design change 100-240V ,60 Hz,5.2 V,800 mA,CE,CB,GOST ,EU...
  • Page 135 Note - 136 -...

Table of Contents