Removing An Sd/Mmc Card; Using An Usb Thumb Drive; Inserting An Usb Thumb Drive; Removing An Usb Thumb Drive - Acer n30 Manual

7 Using expansion features

Using an USB thumb drive

3
1
2
3
Using an USB thumb drive
1
2
1
2
62
Push the card into the slot using your finger until you feel the card lock and hear an
audible system sound. This indicates that the card is properly seated within the slot.

Removing an SD/MMC card

Hold your handheld securely.
Release the card from the slot by using your thumb to push against the top of the
card, as if you were pushing it further into the slot (a). An audible system sound and a
click will signal that the card has been released.
Gently remove the card from the slot (b).
Your Acer n30 supports USB host expansion. Via 3-in-one sync cable, you can access a
USB thumb drive directly on your n30.

Inserting an USB thumb drive

Get the 3-in-one sync cable, and attach its 26-pin connector to the handheld.
Insert the USB thumb drive into USB host port of 3-in-one sync cable.

Removing an USB thumb drive

Remove the USB thumb drive from USB host port of 3-in-one sync cable.
You can keep 3-in-one sync cable attached to handheld, or remove it from handheld.