Main Unit And Accessories; Optional Parts; Functions And Dimension; Selecting The Installation Location - Fujitsu UTB-*WB series Installation Manual

2. MAIN UNIT AND ACCESSORIES

Description Q'ty
Installation manual
1
Receiver unit
1
Cover
1
Insulation
1
Binder Small
1
Medium
1
Screw (M4 × 20mm)
2
Screw (M4 × 12mm)
1
Screw (M4 × 10mm)
2
Receiver unit cable A
5m
Receiver unit cable B
15cm
Hook metal
1
Bracket (cover)
1
Receiver unit cable D
15cm
Application
This book
For receiving the signal
from the wireless
remote controller
For receiver unit
For receiver unit
For receiver unit
For receiver unit
For installing receiver
unit to wall, etc.
For attaching the hook
90
metal to the holder cover
For attaching the hook
metal to the indoor unit
For connecting PCB of
indoor unit to receiver unit
For connecting PCB of
indoor unit to receiver unit
For installing receiver
unit to indoor unit
For receiver unit
For connecting PCB of
indoor unit to receiver unit

3. OPTIONAL PARTS

Description Q'ty Application
For
Receiver unit
extending
cable C
10m
the receiver
unit cable
4. FUNCTIONS AND DIMENSIONS
Functions
OPERATION LAMP (Green)
TIMER LAMP (Orange)
FILTER SIGN LAMP (Red)
MANUAL AUTO BUTTON
SIGNAL RECEIVER
Dimensions
11.5
13.6
18.5
7.2
5. SELECTING THE INSTALLATION
LOCATION
Consult the user and determine the installation location
according to the following:
(1) The receiver unit wiring can be extended up to 10 m.
(To extend the wiring, purchase the optional receiver unit
cable C.)
(2) The signal reception angle of the receiver unit is shown in
the following figures.
(3) Do not install the receiver unit near a fluorescent light.
(The unit must be at least 1 m away from a light source.)
(4) Do not install the receiver unit where it will be exposed to
direct sunlight.
(5) Do not install the receiver unit where it will be exposed
directly to the airflow from the indoor unit.
Part No. Model
9378143012 UTB-YWB
9378143036 UTB-TWB
90
13.6
57.4
Unit:mm
7.2
17
En-3