Layout Of Basic Screen - Sharp PN-L401C Operation Manual

Screen example: Whiteboard mode
(1)
(2)
(1) Indicator
Touch the icon to launch the square menu. (Page 11)
To use multiple 3 button pens, set as indicated below.
• Set "Input Mode" in the Touch Pen Utility to "Standard"
• Set "Touch Pen" to "Draw with Active Pen Only" in the pen software
When these settings are configured, a number of indicators equal to the number of 3 button pens appears (maximum of 4).
The Touch Pen Utility registration number appears in the indicator of each touch pen. (Page 52)
Example: Pen Number 1
(2) "Pin" button
Touch to switch between the pin / unpin settings.
If you want to always display the toolbar on the screen, pin button should be selected.
When set to the pin setting, the button is blue.
If you only want to display the toolbar when the menu is displayed, select the unpin setting.
(3) Sheet list
Touch this tab to display the list of sheets shown as thumbnail images. (Page 22)
(4) Settings
Displays the Pen Software settings screen. (Page 52)
(5) Navigation window
Touch to show/hide the navigation window. (Page 39)
(6) Search box
You can search for text and handwritten characters in the box. (Page 30)
(7) Sheet navigation buttons/Page No.
Touch the sheet navigation button (
The number shown at the center is the page No. of the current sheet.
When the last sheet is displayed, press
(8) Board list (full version only)
Touch to display the list of boards as thumbnail images. (Page 20)
(9) Minimize (full version only)
The software will be minimized in the task tray.
(10) Window / Maximize (full version only)
Displays the software in a window. (Page 16)
* Whiteboard mode only.

Layout of Basic Screen

(3) (4) (5) (6)
) to change the displayed sheet. (Page 20)
to add a sheet at the end.
(7) (8) (9)(10) (11)
7
E
(12)
(13)