Exp.i/O Detail Setting - LG ACP IV ACP Owner's Manual

■ Exp.I/O Detail Setting

• UI
Item
Icon Type
Unit Name
(20 Characters)
Address
Use
Unit Symbol*
I/O Type
Min.*
Max.*
Range*
Correction*
Enable
Trend
* Only when I/O type is VOL, CUR, PT1000, NTC10K, or NI1000, the corresponding button is
displayed.
Select an icon type
Enter the device name.
y Up to 20 characters.
It is automatically input according to Exp.I/O address, and it cannot be
changed.
Select device usage
y Status information: run/stop, short/open, alarm/normal, close/open,
tun on/off, occupancy/vacancy
y Number information: temperature, humidity, open, level, operation
ratio, concentration, pressure
Select unit symbol
y It is automatically selected according to the usage selection.
Select I/O type (Binary or VOL, CUR, PT1000, NTC10K, NI1000)
Input minimum value
y You can input up to 5 digits
Input maximum value
y You can input up to 5 digits
Select range if voltage on current input is required.
Input correction value
y You can input up to 5 digits
During Exp.I/O registration, 14 Points are available for registration, the
enable check box must be selected to enable use.
Save the value in the history at every designated interval (15 minutes).
USING THE PROGRAM
Description
113