Dell Edge Gateway 3001 Installation And Operation Manual page 9

Right view
Table 5. Right view — 3001
Features
1 RS232/RS422/RS485 port one (configurable in
the BIOS)
2 RS232/RS422/RS485 port two (configurable in
the BIOS)
3 USB 2.0 port
4 GPIO port
The following table shows the GPIO-port pin definition details.
Table 6. GPIO-port pin definition details
Pin 1
Signal GPIO0
Pin 2
Signal GND
NOTE: GPIO1 to the GPIO15 pins are 0-5 V input/output and digital/analog configurable pins.
NOTE: GPIO port is powered by analog devices' AD5593R.
NOTE: Each pin has 100K series resistor between the connector and the AD5593R.
3 5
GPIO1 GPIO2
4 6
GND GND
Provides data transfer speeds up to 1 Mbps in RS232 and 12
Mbps in RS422/RS485.
Provides data transfer speeds up to 1 Mbps in RS-232 and 12
Mbps in RS422/RS485.
Connect a USB enabled device. Provides data transfer
speeds up to 480 Mbps.
Connect a GPIO enabled device or dongles.
7 9
GPIO3 GPIO4
8 10
GND GND
11 13
GPIO5 GPIO6
12 14
GND GND
15
GPIO7
16
GND