Honeywell CN75 User Manual page 41

7. Place the microSD card in the holder with the contacts facing away from the
8. Close and latch the microSD card holder and SIM card holder.
9. Replace the door and secure it with the two screws removed in Step 4.
10. Install the battery. Press down firmly on the bottom of the battery, and make
11. Attach the handstrap.
12. Press the Power button. Once the computer finishes the power up sequence
13. Select how you want the microSD card used: Use as portable storage or
14. Tap Next and then Done once the SD card is ready message appears.
75 Series Mobile Computer User Guide
holder.
sure that the battery release latch is fully engaged.
and identifies the new card, a set up query appears.
Use as internal storage.
31