Configure The Access Point; Installation; Power On The Access Point - D-Link DWL-6610AP Quick Installation Manual

Power on the Access Point

To power on the DWL-6610AP, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DWL-6610AP and the
other end into a port on a PoE switch or injector.

Configure the Access Point

To set up and manage the DWL-6610AP, use one of the following methods:
1. Connect the Access Point to your computer directly via a straight-through Ethernet
cable. Manage the Access Point from the computer.
Ensure your computer is configured with a static IP address in the 10.90.90.0/24
subnet.
Launch a web browser, type the default IP address of the Access Point
(http://10.90.90.91) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
DWL-6610AP
6

3. Installation

D-Link DWL-6610AP Quick Install Guide
Computer