Injecting Bursts Of Steam; Automatic Burst Of Steam; 1, 2 Or 3 Bursts Of Steam - Miele HR1956 Operating Instructions Manual

Injecting bursts of steam

Steam can cause scalding.
Do not open the door during bursts
of steam. Also, condensation on the
sensors will cause them to have a
slow reaction time.

Automatic burst of steam

Automatic burst of steam
display.
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
The water will vaporise in the oven
whilst steam is being released and
of steam active will appear in the display.
After the burst of steam
will appear in the display.
finished
 Continue cooking until the end of the
cooking duration.
appears in the
Burst
Burst of steam
Moisture plus 

1, 2 or 3 bursts of steam

Manual bursts of steam
If you have selected
release the bursts of steam as soon as
Start Manual burst of steam
display.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: Set the minute minder  to remind
you when to do so.
 Select
Start Manual burst of steam
The burst of steam is released and
appears in the display.
of steam active
 Proceed as described to inject further
bursts of steam.
At the end of each burst of steam
of steam finished appears in the display.
 Continue cooking until the end of the
cooking duration.
Time-controlled steam
The oven will release the steam after
the specified amount of time.
Manual you can
appears in the
.
Burst
Burst
77