Nas Device-Id - HP 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key authentication cipher IT8Q4sHnitM=
[Sysname-radius-radius1] display this
#
radius scheme radius1
key authentication cipher IT8Q4sHnitM=
#
# For RADIUS scheme radius1, set the shared key for secure accounting communication to the plaintext
string ok and specify to display the key in plain text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting simple ok
[Sysname-radius-radius1] display this
#
radius scheme radius1
key accounting simple ok
#
# For RADIUS scheme radius1, set the shared key for secure accounting communication to the plaintext
string ok and specify to display the key in cipher text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting ok
[Sysname-radius-radius1] display this
#
radius scheme radius1
key accounting cipher aMjIsi9yePg=
#

nas device-id

Syntax
nas device-id device-id
undo nas device-id
View
System view
Default level
2: System level
Parameters
device-id: Device ID for the switch, which can be 1 or 2.
Description
Use the nas device-id command to specify the device ID to be used in stateful failover mode. Two switches
working in stateful failover mode use the device IDs of 1 and 2 respectively.
Use the undo nas device-id command to restore the default.
50