THANK YOU! ◆ Do not install the repeater in explosive atmospheres (infl ammable We are grateful you purchased this KENWOOD repeater. We gas, dust particles, metallic powders, grain powders, etc.). believe this easy-to-program repeater will be highly eff ective in your communications system, and will keep personnel operating at peak effi...
CONTROLS AND FUNCTIONS Front Panel ■ CH/STATUS VOLUME POWER BUSY a Speaker g Programmable Function keys Press these keys to activate their programmable functions. b CH/STATUS Display Two 7-segment digits display the channel number, name, h BUSY indicator or status. Lights green while a signal is being received.
Page 5
ADDENDUM Terminal Description MIC (Modular Jack) Pin Name Description SpeciÞ cation Notes Not used Not used Power Output 13.6 V PTT Signal/ Input Impedance 22 k TXD2 Asynchronous Send Data MICG MIC GND MIC GND MIC Input Hook Detection/ HOOK Input Impeadance 100 k RXD2 Asynchronous Receive Data Not used...
MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antenna. • Antenna Minimum Safe Distance: 180 cm (6 feet), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits.