Launching Configuration Cloning Utility Gui; Using Configuration Cloning Utility Gui - Honeywell Thor VM3 User Manual

Launching Configuration Cloning Utility GUI

1. Locate the CCU icon either on the desktop or by selecting
2. Right-click on the icon.
3. Select Run as administrator to launch the CCU.
It is necessary to run the CCU as an administrator because the CCU must be
able to access and make changes to the Windows registry.
Rather than selecting to run as administrator each time, right-click on the
CCU icon and select Properties. Tap the Compatibility tab and check Run this
program as an administrator. This modification affects the current user only
unless Change settings for all users is tapped before changing the privilege
level.
If a User Account Control message is displayed, you must allow the CCU to make
changes to the computer.

Using Configuration Cloning Utility GUI

Menu Options
File
The File menu contains information for working with the configuration files.
About
Displays version and copyright information for the Configuration Cloning Utility.
Open
Opens a configuration file. The CCU looks for configuration files in the C:\Win-
dows\DDF folder. CCU can open the following files types:
•
186 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
> Honeywell >Configuration Cloning.
ddf files - These files contain the factory default values for the software. These files
are placed on the Thor VM3 when the applicable software was installed or upgraded.
(Start) > All Programs