Registry - Honeywell Thor VM3 User Manual

Registry

Start > Settings > Control Panel > Registry
Choose options for managing the registry and rebooting the Thor VM3.
Button
Load User
Defaults
Save User
Defaults
Load Registry
Defaults
Restart
202
Action
When clicked, a standard load file dialog is opened, to allow the user to pick a Registry
Save (.RSG) file. The applet then copies the specified User registry file to the Active
registry. The user is asked to verify a reboot, and then the applet does a warmboot to
activate the new registry.
Note: When the Thor VM3 is set to user defaults, a second reboot must be
performed to load the WLAN driver. When the Thor VM3 has finished booting,
return to the Registry panel and tap Restart,
When clicked, a standard Save File dialog is opened, to allow the user to name the
Registry Save (.RSG) file. The applet then copies the Active registry to the specified
User registry file and reboots the device.
The applet copies the Factory Default registry from the OS to the Active registry (by
deleting the current registry). The user is asked to verify a reboot, and then the applet
performs a restart to activate the factory default registry. If a user password has been
set, the applet warns the user that the password will be erased, and asks them to
enter it before the reboot is allowed.
Note: When the Thor VM3 is reset to factory defaults, a second reboot must be
performed to load the WLAN driver. When the Thor VM3 has finished
booting, return to the Registry panel and tap Restart,
When clicked, the OS performs a registry save, and then a restart. OS and CAB files
are reloaded.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide