Related Manuals for Makita MSS700
Summary of Contents for Makita MSS700
- Page 1 INSTRUCTION MANUAL Circular Saw MSS700 004026 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENGLISH SPECIFICATIONS Model MSS700 Blade diameter 185 mm at 90° 66 mm Max. cutting depth at 45° 44 mm No load speed (min 4,700 Overall length 286 mm Net weight 3.5 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. -
Page 3: Additional Safety Rules For Tool
19. Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired. 20. Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. - Page 4 jump backwards, but kickback forces can be Unsharpened or improperly set blades controlled operator, proper produce narrow kerf causing excessive precautions are taken. friction, blade binding and kickback. When blade binding, when Blade depth and bevel adjusting locking interrupting a cut for any reason, release levers must be tight and secure before the trigger and hold the saw motionless in making cut.
-
Page 5: Bevel Cutting
WRONG way. If the workpiece is short or small, 1. Clamping screw clamp it down. DO NOT TRY TO HOLD SHORT PIECES BY HAND! (Fig. 2) Fig. 1 004027 For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below workpiece. -
Page 6: Switch Action
Be sure the blade is installed with teeth pointing up • hole in the grip holder. at the front of the tool. Use only the Makita wrench to install or remove the • blade. To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt counterclockwise. -
Page 7: Maintenance
Rip fence (Guide rule) To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be 1. Screw performed by Makita Authorized Service Centers, 2. Rip fence always using Makita replacement parts. 004037 The handy rip fence allows you to do extra-accurate... - Page 8 Makita Corporation Anjo, Aichi, Japan 884750-3...