Table of Contents
Advertisement
3.7.3.2
Alarm signal input interfaces
FOX615
Installation
•
Wire diameter: typ. 0.8 mm (AWG 20)
•
Wire insulation diameter: 1.3 ... 3.1 mm
For each connection you have to crimp a Mini-Fit HCS
the corresponding cable. The crimp terminal is then inserted with the cable fit
into the Molex connector frame in the appropriate position.
A connector set with connector frames (1 frame 4x2, 1 frame 3x2) and crimp
terminals (14 Mini-Fit HCS
tions.
For details of the crimp process, refer to the instructions provided with the
crimp tool (for the crimp tool reference, refer to
(installation)
(on page 89)).
The FAMO1 or FAMO1-F provides 3 interfaces for the monitoring of alarm
signals (inputs) for totally 12 alarm signals. Each interface can handle up to
4 alarm signals.
50
m ov ing fa ns
re fe r to ha ndbook
Figure 39: FAMO1 and FAMO1-F alarm signals input interfaces
Each alarm interface F3, F4, F5 uses a pin assignment as follows:
5
6
7
8
1
2
3
4
Figure 40: Molex connector frame alarm signal inputs
Table 6:
Alarm input interfaces pin connection
Alarm Interface
F3
F4
Alarm_in 1
Alarm_in 5
Alarm_in 2
Alarm_in 6
Alarm_in 3
Alarm_in 7
Alarm_in 4
Alarm_in 8
Standard crimp contacts are connected and implemented within the individ-
ual Molex connector frames as required for monitored alarm signals.
If the DUPF1 is implemented it uses 2 of the 12 alarm inputs. For details,
refer to section
DUPF1 alarm interface
I N S T A L L A T I O N P R O C E D U R E S
TM
) is available for optional alarm signal connec-
Table 15: Checklist for tools
F3 F4 F5
fa n 4 8 VDC 1 9 " 1 U
R2 A
3 7 9 7 0 0 0 3
2 1 1 1 7 4 3 4 7 3
2 0 1 1 W 4 4
F 2 : Ala rm output
F 3 : Ala rm inputs
1 -2
1 -4
Connector Pin
F5
Signal
Alarm_in 9
8
Alarm_in 10
7
Alarm_in 11
6
Alarm_in 12
5
(on page 68).
TM
crimp terminal on
F4 : Ala rm inputs
F 5 : Ala rm inputs
5 -8
9 -1 2
GND
4
3
2
1
67
Hide quick links:
Advertisement
Table of Contents
