Husqvarna DM230 Safety Instructions page 2

 Press in the power switch and make sure the switch returns to its original position when you release it.
 Check that the power switch and the power switch lock move easily.
General Safety Precautions
 Do not use the drilling machine without first reading and understanding the contents of this Operator's Manual.
WARNING! There is always a risk of shocks from electrically powered machines. Avoid unfavorable weather conditions and body contact with
lightning conductors and metal objects. Always follow the instructions in the Operator's manual to avoid damage.
 Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision your judgment or your
co-ordination.
 Wear personal protective equipment. See instructions under the heading Personal protective equipment.
 Never carry the machine by means of the cord and never pull out the plug by pulling the cord. Keep all cords and extension cords away from
water, oil and sharp edges. Make sure the cord is not pinched in doors, fences or the like. Otherwise it can cause the object to become live.
 Check that the cord and extension cord are intact and in good condition. Use an extension cord intended for outdoor use. Never use the machine if
the cord is damaged, hand it in to an authorized service workshop for repair.
 Do not use an extension cord while it is rolled up to avoid overheating.
 The machine should be connected to an earthed outlet socket.
 Check that the mains voltage corresponds with that stated on the rating plate on the machine.
 Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and
service measures must be carried out by trained and qualified specialists.
 Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual.
 People and animals can distract you causing you to lose control of the machine. For this reason, always remain concentrated and focused on the
task.
 Be careful as clothing, long hair, and jewelry can get caught in moving parts.
 Transport and storage
 Do not store or transport the drilling machine with the drill bit fitted in order to protect your drilling machine and drill bits from damage.
 Store the drilling machine in a lockable area so that it is out of reach of children and unauthorized persons.
 Store the drilling machine and stand in dry and frost free conditions.
PRESENTATION
It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operator's manual as a
valuable document. By following it's content (using, service, maintenance etc) the life span and the second-hand value of the machine can be
extended. If you will sell this machine, make sure that the buyer will get the operator's manual.
A purchase of one of our products gives you access to professional help with repairs and services whenever this may be necessary. If the retailer
who sells your machine is not one of our authorized dealers, ask him for the address of your nearest service workshop. Use only genuine parts for
repairs. The warranty is not valid if non genuine parts are used.
Husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and
appearance of products without prior notice and without further obligation introduce design modifications.
• The DM 230 is an electric handheld drill, intended for drilling concrete, brick and various stone materials.
• The drilling machine has a modular design and is easy to assemble.
SmartstartTM
If the SmartstartTM button is pressed in directly after the power switch is pressed in, the speed is reduced by 50%. In SmartstartTM mode the
machine has less power until the button is pressed in again. These functions are of great use for creating a pilot hole for drilling.
ElgardTM
ElgardTM is an electronic overload protection.
If the motor is overloaded, the overload protection pulses the motor. Reduce the load and the motor returns to its normal speed. The overload
protection disconnects the power, if the machine is subjected to heavy loads or if the drill bit jams. The machine is reset by first releasing the power
switch and then pressing it in again. If the drill bit jams, the mechanical slip clutch protects the gearbox before the overload protection disconnects
the power.
Speed control
Speed control always gives maximum output power from the machine. The speed control function provides the machine with a limited idling speed.
Ergonomics
The soft rear section on the DM 230 has a large contact area so that the machine sits better against the body. The rounded handle makes the
machine comfortable to hold while drilling. The protective loop forms a practical carry handle when transporting.
• The machine is equipped with spirit levels to facilitate drilling and a swivel handle with an integrated adapter for support pins to make the
work more comfortable.
Need It. Rent It!
- 2 -