Securing And Locking Flexlogic™ Equations - GE F60 Instruction Manual
Ur series feeder protection system
Hide thumbs
Also See for F60:
- Instruction manual (732 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (724 pages)
Table of Contents
Advertisement
4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
Once the template has been applied, users will only be able to edit the settings specified by the template, but all settings
will be shown. The effect of applying the template to the phase time overcurrent settings is shown below.
4
Phase time overcurrent settings window without template applied.
Figure 4–6: APPLYING TEMPLATES VIA THE VIEW ALL SETTINGS COMMAND
e) REMOVING THE SETTINGS TEMPLATE
It may be necessary at some point to remove a settings template. Once a template is removed, it cannot be reapplied and
it will be necessary to define a new settings template.
1.
Select an installed device or settings file from the tree menu on the left of the EnerVista UR Setup main screen.
2.
Select the Template Mode > Remove Settings Template option.
3.
Enter the template password and click OK to continue.
4.
Verify one more time that you wish to remove the template by clicking Yes.
The EnerVista software will remove all template information and all settings will be available.
The UR allows users to secure parts or all of a FlexLogic™ equation, preventing unauthorized viewing or modification of
critical FlexLogic™ applications. This is accomplished using the settings template feature to lock individual entries within
FlexLogic™ equations.
Secured FlexLogic™ equations will remain secure when files are sent to and retrieved from any UR-series device.
a) LOCKING FLEXLOGIC™ EQUATION ENTRIES
The following procedure describes how to lock individual entries of a FlexLogic™ equation.
1.
Right-click the settings file or online device and select the Template Mode > Create Template item to enable the set-
tings template feature.
2.
Select the FlexLogic > FlexLogic Equation Editor settings menu item.
4-8
Phase time overcurrent window with template applied via
Template Mode > View All Settings
the
The template specifies that only the
settings be available.
4.1.6 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS
F60 Feeder Protection System
4 HUMAN INTERFACES
command.
Pickup
and
Curve
842859A1.CDR
GE Multilin
Advertisement
Table of Contents
