Connecting To A Computer - Toshiba AT10-B User Manual

1.
2.

Connecting to a computer

With a Micro-USB port on the tablet, you can connect your tablet to a
computer for data transfer.
To connect to a computer:
1.
2.
The Micro-USB connector of the USB cable must be correctly plugged into
the Micro-USB port on the tablet. Failure to do so correctly might result in
possible damage to the Micro-USB port.
Depending on your settings, your tablet will be recognized as a removable
MTP (Media Transfer Protocol) device or PTP (Picture Transfer Protocol)
device allowing you to access its contents from a computer.
If your computer does not support MTP, try using PTP instead.
To remove this tablet from a computer:
1.
2.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, Failure to do so can damage the connecting pins.
User's Manual
Tap All Apps -> Settings -> Apps.
Tap an item you want to manage from DOWNLOADED/RUNNING/
ALL/DISABLED tab.
Refer to Apps section in Settings chapter for details.
You can stop some of the running applications.
Plug the Micro-USB connector of the USB cable into the Micro-USB
port on this tablet.
Figure 4-2 Connecting an Micro-USB cable
1. Micro-USB port
Plug the other end of the USB cable into the USB port on the
computer.
Make sure all file operations are finished.
Unplug the tablet from your computer.
2. Micro-USB connector
4-7