Siemens SINUMERIK 840D sl Operating Instructions Manual page 84

Release management - Updating the eP-Satellite server
5.2 Installing the eP-Satellite server software
Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be
located no more than one level below the drive letter; otherwise, installation problems
relating to the depth of the directory will arise. It must be ensured that none of the extracted
files including subfolders has read-only access.
Example: C:\temp\server_install_x.x.x.x
You must ensure that the unzipped installation package contains an adapted settings file
(under \tools\install). Following this, you need to run "install satellite_install.cmd".
Enter the following directory paths and confirm the queries as indicated in the table below:
Query
Install ePS Trigger Agent
Installation path
Database for logging
Create directories
Load assemblies to GAC
Installing language packages
Unzip Server_install_Ing_yy_x.x.x.x.cab (yy = language code for the relevant language)
Run setup_install_languages.bat under \tools\install\ in each unzipped package.
Installation path
Load assemblies to GAC
This exact procedure must be followed for all language packages. It is possible to do this for
more than one package at the same time. Once you have completed this process, you
should be able to see folders with each of the relevant language codes in directory
%Installpath%\ePS_Services\Services\Version4\PC\bin.
Installing Genesis V2
In the Genesis directory, run file "genesis_x.x.x.x.msi".
Installation path
Logging directory
84
Input
YES
%Installpath%\ePS_Services\Services\Version4
%Database\(Instance)%
YES
YES
%Installpath%\ePS_Services\Services\Version4
YES
%Installpath%\ePS_Services\AppServer_V4\Genesis_V2
%Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_Genensis
eP-Satellite server
Operating Instructions, 06/2009