Mitsubishi Electric BD-1G User Manual page 17

WiFi Menu(Miracast)
After power on, wait until the above
display appears.
Select Miracast.
When 'Miracast' is selected, the user
shall be shown below figure.
Initiating the connection on the users
device to Miracast will take them
through one of the connection methods
outlined below. Pressing cancel from
this screen will take the user back
to the Mobile Device Settings.
Depending on the device, one of the
following connection methods
will be used.
1) Push Button Configuration
2) Display Method
3) Keypad
In the case of a simple connection,
on the BD-1G and confirmed on the
device, the user will see the screen
shown above figure.
In the case of a Display Method
Connection, the BD-1G Module will
display a popup showing a PIN # and
requesting the user to enter the
PIN # as shown below figure. If entered
correctly, the device will
begin screening.
17