Audio Delay; Tone Control - Yamaha aventage RX-A3070 Owner's Manual

■ Zone2 Set, Zone3 Set
Configures the Zone2 or Zone3 settings.
Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
If you have connected an external amplifier with volume control to the unit, disable the volume
adjustment for the corresponding zone.
Settings
Fixed Disables volume adjustments for Zone2 or Zone3 output.
Variable Enables volume adjustments for Zone2 or Zone3 output.
X
This setting is not available depending on the "Power Amp Assign" setting (p.142).
Max Volume
Sets the Zone2 or Zone3 limit value of the volumes.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
X
This setting is available only when "Volume" is set to "Variable".
Initial Volume
Sets the Zone2 or Zone3 initial volume for when the unit is turned on.
Settings
Off Sets the level at the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments).
On
(Specify a volume level which is lower than the "Max Volume" setting.)
X
This setting is available only when "Volume" is set to "Variable".

Audio Delay

Adjusts the audio output timing for Zone2 or Zone3 so that the audio is synchronized with the
video.
Setting range
0 ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Off Produces stereo sounds in Zone2 or Zone3.
On Produces monaural sounds in Zone2 or Zone3.
Enhancer
Enables/disables Compressed Music Enhancer (p.83) for Zone2 or Zone3 output.
Settings
Off Disables Compressed Music Enhancer.
On Enables Compressed Music Enhancer.

Tone Control

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2 or
Zone3 output.
Settings
Adjusts the levels of the high-frequency range (Treble) and low-frequency range
Auto (Bass) automatically in synchronization with the main volume, with correction for
the auditory response of the human ear.
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Manual
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Does not adjust the level of high-frequency range (Treble) and low-frequency
Bypass
range (Bass).
156
En