Table of Contents
Advertisement
3.
Press the [Menu] button.
The [Settings Menu] screen is shown on the LCD.
4.
Select [3: Test Print] by pressing the [] or []
button, and press the [Scan/Enter] button.
The [No. of Sheets Scanned] screen is shown on the
LCD.
ATTENTION
If the Imprinter is disconnected or not connected properly,
[Cannot use this function because the Imprinter is not
connected.] is shown on the LCD.
5.
Select [1: Single Sheet Only] or [2: Multiple
Sheets] by pressing the [] or [] button, and
press the [Scan/Enter] button.
When [2: Multiple Sheets] is selected, printing is
performed for all sheets set in the scanner.
The [Print Pattern] screen is shown on the LCD.
6.
Select a print pattern by pressing the [] or []
button, and press the [Scan/Enter] button.
HINT
Print Test Patterns
Test Pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_`00000000
Test Pattern 2 (Horizontal):
abcdefghijklmnopqrstuvwxyz{|}‾ 00000000
Test Pattern 3 (Horizontal):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
Test Pattern 4 (Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_`00000000
Test Pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}‾ 00000000
Test Pattern 6 (Vertical):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
The numbering section "00000000" increases in increments
of one, starting from 0 (zero).
④
③
②
①
Sample Print Out of a Test Pattern
The [Test Print] screen is shown on the LCD.
7.
Select [1: Yes] by pressing the [] button or []
button, and press the [Scan/Enter] button.
The blank sheet is fed into the scanner, and the
imprinter will print out a print test pattern leaving
a 5 mm gap (with an allowance of 4 mm inwards
or outwards) from the edge of the document.
8.
To stop a test print, press the [Power] button on
the operator panel to turn off the scanner.
fi-718PR Imprinter Operator's Guide | 7
⑥
⑤
5 mm
Advertisement
Table of Contents
