Preface Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system (hereinafter referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or non-Fujitsu servers.
Windows Server 2008 R2 for Itanium-Based Systems ® ® Microsoft Windows Server 2008 HPC Edition ® ® Microsoft Windows Server 2008 R2 HPC Edition FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 5
■ Abbreviations Used in This Manual • "ETERNUS DX500 S3" refers to the FUJITSU Storage ETERNUS DX500 S3 Disk storage system and "ETERNUS DX600 S3" refers to the FUJITSU Storage ETERNUS DX600 S3 Disk storage system. • "ETERNUS DX" refers to the ETERNUS DX500 S3 and ETERNUS DX600 S3 Disk storage systems.
Page 6
The black "Must Do..." circle indicates actions that must be taken. The required ac- tion is both illustrated inside the black disk and written above it (e.g. Unplug). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 7
- Be careful that no liquid seeps into the ETERNUS DX when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS DX. Warning layout ribbon FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
2.2.1 Switching On and Off the Main Line Switch on the Power Distribution Unit (for Regions Other than EMEA&I) ....................................43 2.2.2 Switching On and Off the PSU Switch on the Power Supply Unit .................45 2.2.3 Powering On ...............................46 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 9
6.2.1 Maintenance Support Period ..........................58 6.2.2 Replacing Batteries.............................59 6.2.3 Related Service ..............................59 Chapter 7 Troubleshooting 7.1 Check List ............................. 60 7.2 Required Information for Inquiries ....................65 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 10
OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit ............46 Figure 3.1 ETERNUS Web GUI Screen .........................50 Figure 3.2 Event Notification ............................53 Figure 3.3 Audit Log..............................53 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 11
General Status of ETERNUS CLI .........................51 Table 4.1 Volume Formatting Time (Disk) .......................54 Table 4.2 Rebuild Process Time (Disk) ........................55 Table 4.3 Copyback Process Time (Disk) ........................55 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
This section provides the names of the components in the front of a controller enclosure. ● With a Front Cover Figure 1.1 Front View of a Controller Enclosure (with a Front Cover) Operation panel Front cover FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
NUS CLI. FAULT The ETERNUS DX is in error status. (amber) (*1) A part of the ETERNUS DX requires preventive maintenance. (blinks amber) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The PFM is in normal status. (green) The PFM is busy or temporarily unavailable. (blinks green) FAULT The PFM is in error status. (amber) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The battery is being charged or is ready for discharge. (green) (Charge) The battery is in error status. (amber) (BCU Alarm) The battery is in error status. (amber) (BTU Alarm) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
This port is used to connect a controller enclosure to a drive enclosure with a cable between enclosures. PWC port This port is used to connect a power synchronized unit with an RS232C cable. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
This port is used to connect a controller enclosure to a drive enclosure with a cable between enclosures. PWC port This port is used to connect a power synchronized unit with an RS232C cable. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
DI (OUT) LINK The link between the DI (OUT) port and the destination port has (green) been established. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
This port is used to connect a host interface cable. Host Interface Port #1 This port is used to connect a host interface cable. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
LED status Meanings POWER AC power is supplied to the power supply unit. (green) FAULT The power supply unit is in error status. (amber) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Figure 1.17 Operation Panel (2.5"/3.5" Type Drive Enclosure) DE-ID The DE-ID (drive enclosure number) of the drive enclosure is displayed. IDENTIFY LED FAULT LED POWER LED FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The drive is in error status. • (amber) • In response to commands from ETERNUS CLI, the location of the drive is identified. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The ports to connect the cables are indicated. This occurs while a (blinks amber) drive enclosure is being added. READY The I/O module is in normal status. (green) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
FAN FAIL The power supply unit or the fan in the power supply unit is in er- (amber) ror status. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
This section provides the names of the components in the rear of a high-density drive enclosure. Figure 1.25 Rear View of a High-density Drive Enclosure FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
ETERNUS Web GUI or ETERNUS CLI. FAULT The drive enclosure is in error status. (amber) POWER DC power is supplied to the drive enclosure. (green) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The drive is in error status. • (amber) • In response to commands from ETERNUS CLI, the location of the drive is identified. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The ports to connect the cables are indicated. This occurs while a (blinks amber) drive enclosure is being added. READY The I/O module is in normal status. (green) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The installation location of the fan expander module is identified (blinks blue) according to the instruction that is issued from ETERNUS Web GUI or ETERNUS CLI. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
FAN FAIL The power supply unit or the fan in the power supply unit is in er- (amber) ror status. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Figure 1.33 Front View of a 19-inch Rack Door handle For instructions on how to open the front door, refer to "2.1.1.1 How to Open the Front Door" (page 40). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Figure 1.34 Rear View of a 19-inch Rack Door handle For instructions on how to open the rear door, refer to "2.1.2.1 How to Open the Rear Door" (page 41). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Inlet (INPUT) This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input cable). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Outlet (OUTPUT) This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC output cable). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
How to Open the Front Door Insert the rack key and turn the key 180 degrees anticlockwise. This will unlock the front door. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
How to Open the Rear Door Insert the rack key and turn the key 180 degrees clockwise. This will unlock the rear door. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 42
How to Close the Rear Door Reverse the opening procedure to close the rear door. Close the rear door with the door handle rotated. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
● For 2U Figure 2.2 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit Main line switch FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
When turning the main line switch to ON (marked "|") right after turning the main line switch to OFF (marked "¡"), turn it back to ON (marked "|") after the POWER LED of the power supply unit has turned off completely. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
For the drive enclosure, the POWER LED on the power supply unit emits green lights and the fan revolves at high speed for 30 seconds. Drive enclosure Power supply unit (PSU#0) Power supply unit (PSU#1) POWER FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
PSU switches on the power supply units of the ETERNUS DX are "ON". Do not turn the main line switches of the power distribution units and the PSU switches on the ETERNUS DX to the OFF position. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 47
After approximately three minutes (after approximately six minutes in a Unified configuration), check that the READY LED of the controller enclosure is lit up. Drive enclosure Controller enclosure FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Press the Power switch only once. If the Power switch is pressed again between the time of the READY LED turning off and the POWER LED turning off, the ETERNUS DX power may turn on. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 49
The ETERNUS DX power is turned off. The POWER LED of the controller enclosure and the POWER LEDs of the drive enclosures are turned off. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked in the Overview screen of ETERNUS Web GUI. Figure 3.1 ETERNUS Web GUI Screen Table 3.1 shows the general status. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
An abnormality is detected and access from the host cannot be received. Subsystem Down The ETERNUS DX cannot be used. Change Assigned CM CM hot expansion recovery is required. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
For the notified Syslog messages, refer to "Message List". ■ Remote Support The information for errors that occur in the ETERNUS DX is notified to the remote support center. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Change settings the process time, ↓ the process details, Log out and the process results Audit log System administrator ETERNUS DX Syslog server FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
*1: The value shows the time required for volume formatting when the volume capacity is 100GB and there is no server I/O. The time that is required depends on the type and configuration of the disk. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
*1: The value shows the copyback process time when the volume capacity is 100GB and there is no server I/O. The time that is required depends on the type and configuration of the disk. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 56
Note that RAID group performance (throughput) may be reduced when a rebuild, copyback, or redundant copy is being performed in the target RAID group. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
ETERNUS DX. For details about the expansion functions using the Unified kit and about performing a Model Upgrade, con- tact your maintenance engineer. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
The standard maintenance support period for ETERNUS DX is five years from the date of purchase, or is de- fined in your service level agreement (SLA). Contact your sales representative for details if you prefer to ex- tend the period. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
If a possible error that may occur is detected or an error occurs when remote support service is used, the con- tents of events are automatically sent to the remote support center and notified to the user. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Has there been a recent main power failure? • If the Power Resume function is enabled, the ETERNUS DX turns on automatically after the power is re- stored. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 61
Are the environment settings for the network service invalid? • Is the IP address incorrect? • Are the settings for the ETERNUS DX LAN ports (firewall) invalid? • FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 62
Force Prefetch mode enabled. Enable the Force Prefetch mode and specify the appropriate value for the Prefetch Limit. This may be caused by accesses that are used for video distribution businesses. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-7742-04ENZ0...
Page 63
For details on this setting, refer to relevant manuals of the switch. After completing the settings, confirm that access from the server is available. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 64
For details on the replacement procedure, refer to the relevant documentation for the LAN card. After completing the settings, confirm that access from the server is available. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
ETERNUS Web GUI. For details on obtaining the log/dump information, refer to "Web GUI User's Guide (Settings)". FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic) Copyright 2014 FUJITSU LIMITED...
Page 66
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...
Page 68
Click below to find more Mipaper at www.lcis.com.tw Mipaper at www.lcis.com.tw...