Page 1
Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd.
You are highly recommended to read the manual before using the data card. The EG602 is offline or removed from a laptop. Getting to Know Your Data Card This is a sketch for Huawei EG602 EDGE data card. The actual product may differ. Earphone Interface Connects the earphone.
Getting Started According to the arrow direction labeled on the back of the EG602, insert the SIM card into the card slot. Make sure that the contact area on the card is facing down and the beveled corner on the card is facing inwards.
After the EG602 is installed, Mobile Partner is launched automatically. Then If yes, double click the Mobile Partner CD-ROM; alternatively, open every time the EG602 is inserted into the PC, the Mobile Partner is launched Mobile Partner and double-click Autorun.exe.
Make sure that the EG602 is inserted to the laptop properly. dust-free place. Do not expose your wireless device to open flames or lit If the EG602 is not detected or there is a yellow excalmatory mark above the EG602, do the following: tobacco products.
Page 7
Restart on ESDs All models of Huawei's wireless device are designed to meet radio Software will attempt to re-initialize a connection once a substantial frequency exposure guidelines such as European Council Recommendation electrostatic discharge causes the device to reset.
Page 8
the wireless device product.] Federal Communications Commission Notice (United States): Before a wireless device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue.