Remote Button Descriptions - Sony RM-VZ220 Operating Instructions Manual

Searching for the correct code
You can set the manufacturer's code using the Search function.
1 Power on the device with its power switch.
2 Aim the RM-VZ220 at the device you want to set.
3 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
4 Enter 9 - 2 - 2 using the number buttons.
The SET indicator flashes three times.
5 Press and hold  to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the  or  button.
6 Press .
The SET indicator flashes three times and turns off.
7 Check if the code number works correctly (see "Remote Button
Descriptions").
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturer's code you have set
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press the desired Device Select button,
then release both buttons.
2 Enter 9 - 3 - 3 using the number buttons.
The SET indicator flashes three times.
3 Press .
4 When the SET indicator starts flashing, count the number of flashes.
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). "0" is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press SET to finish.
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
2 Enter 9 - 7 - 7 using the number buttons.
The SET indicator flashes three times.
3 Press the desired Device Select button.
The SET indicator flashes three times and turns off.
To set the function again, perform the same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
While keeping SET held down, press
2 Enter 9 - 0 - 0 using the number buttons.
The SET indicator flashes three times.
To cancel, press any button except
3 Press .
The SET indicator flashes three times and turns off.
, then release both buttons.
, then release both buttons.
.

Remote Button Descriptions

General
 SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
 Device Select buttons: Press to select the device to operate.
 GUIDE: Displays the program guide (EPG).
 ////
: Moves the cursor to select a menu item/enters the selected item.
 RETURN: Returns to the previous display/exits the menu.
 VOL +/–: Turns the volume up/down.
 POWER: Turns the selected device on and off.
 MUTING: Mutes the volume. Press again to turn muting off.
 SLEEP: Enables the Sleep function (when available).
The number 5, CH+, and  buttons each have a tactile dot for ease of use.
The GUIDE and RETURN buttons do not work for a VCR.
Note on the VOL+/– and MUTING buttons
When a TV or other video device is selected, the TV's volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
  : VIDEO 1 input
: VIDEO 2 input
: HDMI input
 : RGB input
 : (PIP INPUT) Changes the
input mode of the "window"
picture.
 : (PIP) Turns the "window"
picture on and off.
 : (PIP MOVE) Moves the
location of the "window" picture.
 : (PIP STILL) Freezes the
"window" picture.
 : (PIP SWAP) Switches between
"main" and "window" picture.
 A: Red button
B: Green button
C: Yellow button
D: Blue button
 LIST: (CAPTION) Displays closed
captioning.
 MENU: Calls up the menu display.
 INPUT: Changes the input mode.
 1 – 9, 0, ENTER,  (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
 PAGE +/–: (PIP CH +/–) Changes
the channel up/down in the
"window" picture.
 FAVORITES: Enables the Favorite
function.
 INFO: Displays program
information.
 OPTIONS: Displays the options
menu.
 RECALL: Selects the channel
previously selected.
 CH +/–: Switches the channel up/
down.