Advertisement
TC2073 | Instruction Manual | Important Safeguards
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Electrical Connections - Only a qualified electrician
should make electrical connections.
4. Cable Runs - All cable runs must be within
permissible distances.
5. Mounting - This unit must be properly and securely
mounted to a supporting structure capable of
sustaining the weight of the unit. Accordingly:
a. The installation should be made by a qualified
installer, in compliance with local codes.
b. Exercise care in selecting suitable hardware to
install the unit, taking into account both the
composition of the mounting surface and the
weight of the unit. Periodically examine the unit
and the supporting structure to ensure that the
integrity of the installation is intact.
Failure to comply with these stipulations may result in
separation from the support structure. This may cause
damages or injury to anyone or anything struck by the
falling unit.
6. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
Bosch Security Systems | 09 August 2004
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated "dangerous voltage" within the
product's enclosure. This may constitute a
risk of electric shock.
The user should consult the operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Attention: Installation should be performed by
qualified service personnel only in accordance
with the National Electrical Code or applicable
local codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
EN | 2
Advertisement
