Quick Installation Guide DSN-6000 series iSCSI IP SAN storage Package Contents If any of the items are missing, please contact your reseller. IP SAN storage HDD trays Power cords RS-232 cables GBIC transceiver Rail kit Keys, screws for and cable for drives and rail kit DSN-6410/ 6420 only...
Install drives Note : Skip this section if you purchased a solution populated with drives. To install SAS or SATA drives with no Bridge Board use the front mounting holes: To install SATA drives with Bridge Board (DSN-654), fit the Bridge Board first. Then install the drive using the rear mounting holes: Drive slot numbering Slot 1...
Page 4
4. To ensure MPIO is set-up automatically it is recommended that you log on the target twice (from controller 1 then controller 2). Note: iSNS server is recommended for dual controller system. DSN-6110: 1GbE to SAS/ SATA IP SAN storage, Single controller. DSN-6110 with DSN-610: 1GbE to SAS/ SATA IP SAN storage, Dual redundant controller.
Page 5
DSN-6410: 10GbE to SAS/ SATA IP SAN storage, Single controller. DSN-6410 with DSN-640: 10GbE to SAS/ SATA IP SAN storage, Dual redundant controller.
Page 6
Configuration 1.Web UI The D-Link DSN-6000 family includes a simple to use Graphical User Interface (GUI) for integration and management. Be sure to connect the LAN cable, open a browser and enter: http://192.168.0.32 A dialog box for authentication will pop up.
Page 7
Step 3: “Next” Set up the data port IP and click Step 4: “Next” Set up the RAID level and volume size and click Step 4 Step 3 Step 5: Check all items, and click “Finish”. Step 5 Step 6: Done. 3.Logon Microsoft iSCSI initiator Here are the step by step instructions to setup Microsoft iSCSI Initiator.
Page 8
Connect 1.Run Microsoft iSCSI Initiator. 2.Input IP address or DNS name of the target. And then click “Quick Connect”. 3.Click “Done”. 4.Your Computer can now connect to an iSCSI disk.
Tech Support D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States (877) 354-6555 http://support.dlink.com Canada (877) 354-6560 http://support.dlink.ca Ver. 1.00(US)