Kenwood TK-190 Instruction Manual page 11

q TX/ BUSY/ CALL/ Battery low LED
Lights red while transmitting. Lights green while
receiving. Lights orange while receiving a
-Tone/ DTMF call. Flashes red when the
battery power is low while transmitting; replace or
recharge the battery.
Note: This LED can be disabled by your dealer.
w Power switch/ Volume control
Turn clockwise to switch the transceiver ON. Turn
counterclockwise until a click sounds, to switch
the transceiver OFF. Rotate to adjust the volume
level. Clockwise increases the volume and
counterclockwise decreases it.
Note: Your dealer can set a minimum volume level for the
Volume control.
e Channel selector
Rotate to select a channel. Clockwise increases
the channel number and counterclockwise
decreases it.
r Toggle switch
Switch the toggle position to the right ( O ) to
activate its programmable function {page 0}
and to the left ( ● ) to deactivate it. The default
function of this switch is "No Function".
t Top 1
Press this PF (programmable function) key to
activate its programmable function {page 0}. The
default function of this key is "No Function".
y Top 2
Press this PF (programmable function) key to
activate its programmable function {page 0}. The
default function of this key is "No Function".
7