Hitachi GVX-CC64G*BX User Manual page 36

Note 2) When you install the RPM packages one by one, the driver has to be
installed before the utility. Otherwise the installation will fail.
Note 3) Utility is stored in /opt/hitachi/drivers/hba.
Note 4) Do not specify –U or –F option when executing rpm command.
Specifying these options may cause a system hung-up or a system crash.
Note 5) Be sure to install the both RPM packages, driver and utility. If no utility
is installed, the error log required for failure analysis cannot be collected.
(3) Confirm the driver version
Check the version.txt stored in /opt/hitachi/drivers/hba, and confirm that the
driver's version is same as the RPM package.
[Example: Install log]
#
more /opt/hitachi/drivers/hba/version.txt
*
Version 4.11.17.2166
(4) Load the driver
Reboot the system to load the new driver.
# reboot
SLES 12
(1) Get the RPM packages
For Hitachi Compute Blade system, the RPM packages are stored in "Hitachi
Gigabit FC Adapter Driver CD for Linux" CD-ROM and its directory is as follows.
/hfc_media/linux/x86_64/<sles12*>/
<sles12*> : sles12, sles12sp1, sles12sp2
#
htc-hfcldd-kmp-default-<driver version>_<build kernel
version>-<release version>.<sles12*>.<machine
1
type>.rpm
htc-hfcldd-tools-<driver version>-<release
2
version>.<sles12*>.<machine type>.rpm
(The following is an example of SLES12, x86_64)
Copy the RPM packages into /tmp following the procedure below, after
Fri Nov 2 2012
RPM package name
15
Description
Driver
Utility