Sanyo CRD-BPDV3 Owner's Manual page 8

Document No.
Dimensions, External View and Names and
Functions of Each Part
(1/2)
1. Dimensions and External View
(1) External View
Refer to the "General Description".
(2) Dimensions and Dimensional Drawing
Refer to the attached document "Dimensions and Dimensional Drawing".
(3) Names and Functions of Each Part on the Front Panel
Front Panel
6
1
1. Headphone
Terminal
2. Headphone
Volume
3. BUSY
indicator
ON
OFF
4. WRITE
indicator
5. EJECT key
6. Emergency
eject pinhole
7. Disc tray
Document Name
2
: The headphone with a stereo mini plug is connected through this terminal.
: The volume of the headphone connected to the headphone terminal is adjusted
using this volume dial. When the volume dial is turned right, the volume becomes
louder.
: Command executing.
Reading disc, accessing condition and TOC reading condition.
Pause or Stop condition
: This is ON when the data is written onto the disc.
: The disc is ejected, using this key. This key is available even when the tray is
moving. When the PRV command is transmitted from HOST or during writing,
this key is not available.
: If the disc is not ejected when the key is pressed, because of power failure or run
away of the software, this pinhole is used to take out the disc.
: The disc is placed on this tray.
SANYO Electric Co., Ltd.
7
4
3
Page 7
5