Advertisement
Activate the glasses.
Step 1: Turn on the device.
Press the power button to turn the device on.
After powering on, you will see the Activation Wizard. It
will guide you through the activation in a step by step
manner.
Step 2: Install the Glasses Manager app.
If you are using an Android phone, scan the QR code
below to install the Glasses Manager app. Then, you can
enter the app.
Step 3: Log onto the glasses manager app.
You'll need a NDB account to use the Glasses Manager
app. If you have a NDB account or have registered using
your mobile phone number or email address, log onto the
Glasses Manager app.
Step 4: Generates a QR code with the Glasses
Manager app.
If it you are logging onto this app for the first time, you will be
prompted to activate your device. Select a Wi-Fi hotspot you
frequently use, and enter the password. After verification, a
QR code will be generated for you to activate this device.
C1 02.indd 26
Step 5: Scan the QR code with your new glass.
When you are prompted by the instructions on the screen
to scan the QR code and activate your device, tap the
touchpad to scan the QR code.
After the QR code is scanned, your new glass will be
activated and connected to Wi-Fi. Ensure that the Wi-Fi
hotspot signal is available.
Step 6: Activation is complete.
When using your new glass for the first time, you will find
some glasses apps preinstalled on your device. Tap the
touchpad on the main page to see all the available apps.
The main page of the new glass is as shown below.
2015/10/16 15:22:33
Advertisement
