Specifications - Toshiba D-R4SU Service Manual

SPECIFICATIONS

Power requirement during operation
Power requirement at standby
Power supply
Mass
External dimension
Incoming channels
Antenna input/output terminal
Signal system
Laser
Format
Image recording system
Sound recording system
VIDEO input
VIDEO output
S-VIDEO input
S-VIDEO output
COMPONENT output(Y, P , P
B
AUDIO input
AUDIO output
DIGITAL AUDIO OUTPUT BITSTREAM/PCM
(OPTICAL terminal)
Remote control
Operating conditions
Clock display
Clock accuracy
• The design and specifications may change without prior notice.
• The Illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly different from the actual unit.
21W
2.7W
120V AC, 60 Hz
3.5kg
Width 430 x Height 58 x Depth 304mm
TV : 2-69CH, Cable : 1-125CH
VHF/UHF : 75W, F Connector
Standard NTSC Color TV system
Semiconductor laser, Wavelength : 650nm/780nm
DVD -VR format
DVD-Video format
MPEG2
Dolby Digital M1
1.0Vp-p (75W), Sync signal negative, Pin jack x 2 systems, 1 at rear, 1 in front
1.0Vp-p (75W), Sync signal negative, Pin jack x 1 system, 1 at rear
(Y) 1.0Vp-p (75W), Sync signal negative,
(C) 0.286Vp-p (75W) 1 at rear, 1 in front
Mini DIN4 Pin x 2 systems
(Y) 1.0Vp-p (75W), Sync signal negative,
(C) 0.286Vp-p (75W) 1 at rear
Mini DIN4 Pin x 1 system
) Y output (green), 1.0Vp-p (75W), Sync signal negative, Pin jack x 1 system
R
P , P
B R
2.0V (rms), 22kW or above, pin jack (L, R) x 2 systems
1 at rear, 1 in front
2.0V (rms), 2.2kW or below, pin jack (L, R) x 1 system
1 at rear
Optical connector x 1 system
Wireless remote control (SE-R0176)
Temperature: 41°F~95°F (5°C~35°C)
Position: Horizontal
12 hour digital display
Quartz (monthly deviation: approximately ±30 seconds)
output (blue, red), 0.7Vp-p (75W), Pin jack x 1 system each