c) Connect the power adapter to the charging cradle with the symbols on
the power adapter and cradle connector facing the same direction.
d) When connecting the charger, LBA-C300 will be reset and then the
battery begin to charge. If the screen indicates "Battery full" icon,
charging battery is completed.
2. Connect LBA-C300 to your computer using charging cable
a) Turn on your computer
b) Connect charging cable to a USB port on your computer
c) Following same steps shown in the previous section using charging
cable instead of power adapter
If the screen doesn't show charging icon, the Qwerty-Card might not
be connected properly to either USB port or power outlet.
Once it happens, please follow the steps again.
b
b
11