Configuring The Necessary Speaker Settings - Yamaha RXA670 Owner's Manual

8

Configuring the necessary speaker settings

If you use any of the following speaker configurations, follow the procedure below to
configure the corresponding speaker settings manually before performing YPAO.
• Using surround back speakers (p.18), bi-amp connection (p.81) or Zone B
speakers (p.82)
• Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT)
(p.19)
• Using the presence speakers for Dolby Atmos or DTS:X playback (p.21)
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
Note
If you turn on the unit for the first time, the message regarding the network setup appears. For now,
press RETURN and proceed to Step .
3
Press SETUP.
4
Use the Cursor keys to select "Speaker" and press ENTER.
5
Use the Cursor keys to select "Configuration" and press ENTER.
6
Configure the corresponding speaker settings.
▪ When using surround back speakers, bi-amp connections or Zone B
speakers, select Power Amp Assign p.
system.
▪ When using the surround speakers for front . -channel system Virtual
CINEMA FRONT , select Virtual CINEMA FRONT p.
On .
▪ When using the presence speakers for Dolby Atmos or DTS:X playback,
select Layout p. , then select your presence speaker layout.
7
To exit from the menu, press SETUP.
, then select your speaker
, then select
34
En