Advertisement
Step 3– Adjust the Watering Program
1. Set the watering day schedule to water every day of the week (except watering-
restricted days).
2. Set the run time for each zone to those used during the summer months.
Visit http://schedulingadvisor.toro.com to download free software to help with this step.
Step 4– Sensor Installation and Calibration
1. Before installing the batteries in the probe, press the Menu button
so "CA" (calibration) is displayed.
2. At this point you have two calibration options: Manual or Automatic.
Manual
watering cycles), press or hold down the Minus button
set the calibration duration to last zero hours, effectively telling the sensor to set whatever
the current moisture level is as 100%.
Automatic
Minus button
run a manual program immediately after installation as well. This will allow for a total of two
watering cycles (one automatic and one manual) within the calibration period, making for a
more accurate calibration.
Note: For additional calibration methods, refer to the full-length User Guide available at
www.toro.com/pss.
cover.
to set the number of hours for the calibration period duration so it will
on the receiver once
until zero is displayed. This will
5
Advertisement
