LG CM4560 Owner's Manual page 29

USB copying
You can copy various sound source in USB1 to USB2
on USB function.
1. Connect USB device including desired sound files
to USB1 and select USB1 function.
2. Connect another USB device to USB2.
3. Start the recording by pressing USB REC on the
remote control or
4. To stop recording, press Z on the remote control
or I on the unit.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
USB REC. on the unit.
,
Note
y You can check the recording percentage rate
for the USB record on the display window
during the recording.
(MP3/WMA file or Audio CD Only)
y During recording MP3/WMA, there is no sound.
y When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
y If USB recording does not work, the message
like "NO USB", "ERROR", "USB FULL", "NOT
SUPPORT" or "FILE MAX" is displayed on the
display window.
y Multi card reader device or External HDD can
not be used for USB recording.
y A file is recorded by about 512 Mbyte when
you record for a long term.
y You may not store more than 2,000 files.
y You can not record in AUTO DJ mode.
y In case of the unsupported MP3/WMA file,
the file recording may be stopped.
y It'll be stored as follows.
AUDIO CD
The other source*
* : AUX and the like.
Tuner : The current recording frequency is
shown.
Operating 29
MP3/WMA
Tuner
3