D-Link DIR-615 User Manual page 23

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE
software from your computer. The software is no longer needed and will not work through a router.
Select
Enter your PPPoE user name.
Enter your PPPoE password.
Retype the new password.
Enter the ISP Service Name (optional).
Enter the IP address (Static PPPoE only).
Enter the IP netmask (Static PPPoE only).
Enter Start and End LAN IP address.
Click
Click
below.
Enter the Primary and Secondary DNS Server Addresses.
D-Link DIR-615 User Manual
(most common) or . Select
to get the DNS automatically.
to enter the DNS information
21