Safety instructions for installation
To avoid damage to the appliance, it
should not be installed until the
upper cabinet and exhaust hood
have already been mounted.
~
The countertop veneers must be
affixed with heat-resistant glue (100°C),
so that they do not become deformed
or detached.
The backsplash must be heat-resistant
as well.
~
This electric barbecue grill is not to
be used in mobile installations such as
ships.
~
The CS 1312 (barbecue) and
CS 1322 (barbecue) must not be
installed directly next to the CS 1421
(salamander). It is essential to maintain
a distance of at least 150 mm between
an electric barbecue and a salamander
grill.
~
It is essential to ensure that the
network power cable will not be
subjected to any mechanical strain
after installation, e.g., while the water is
draining.
~
Also be sure that the power cord will
not come into contact with any hot
spots on the appliance after installation.
Otherwise, the cord could suffer heat
damage.
20
~
Make sure to carefully observe the
clearance distances listed on the
following pages.
~
Never use joint sealant unless it is
explicitly called for in the instructions.
The seal underneath the appliance
provides sufficient seal with the counter
top.