Advertisement
•
Ensure that the USB connector
cover is closed during use.
The rubber packing on the cover
makes the device water-resistant.
Make sure this packing does not get
soiled or damaged.
If the rubber packing becomes
soiled, wipe it clean with a dry, clean
cloth.
Do not open the USB connector
•
cover in humid environments
in which the device could get
exposed to water.
If the device is exposed to a large
•
amount of water or moisture,
immediately wipe it down with a
dry cloth.
Only open or close the USB
connector cover after having
completely wiped off any moisture
around them, with dry hands and in
an environment where the unit would
not get exposed to water again.
•
If the device gets exposed to
water, thoroughly dry all of the
crevices on the unit's body into
which water might have reached.
Before Use (Important)
This unit has been designed with water-
resistance equivalent to standards
IPX6(*) as defined by the International
Electrotechnical Commission (IEC).
Malfunctions due to water damage
caused by improper use are not
covered by the product warranty, even
if they occur within the warranty period.
Depending on conditions of use,
•
the water-resistant features are
not necessarily guaranteed even
during the warranty period.
* IPX6: Protection against strong jet of
water
About the Device
Loss of data due to trouble, accidents,
or malfunctions of the device is not
covered by any warranty.
15
Advertisement
