MICRO COMPONENT SYSTEM UX-G110 —Consists of CA-UXG110 and SP-UXG110 INSTRUCTIONS LVT2070-001A...
Page 2
Warnings, Cautions and Others CAUTION CAUTION To reduce the risk of electrical shocks, fire, etc.: • Do not block the ventilation openings or holes. 1. Do not remove screws, covers or cabinet. (If the ventilation openings or holes are blocked by a 2.
Page 3
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [Business users] If you wish to dispose of this product, please visit our web page http://www.jvc.eu/ to obtain Battery information about the take-back of the product.
Introduction Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to DO NOT disassemble the System since there ensure your complete understanding and to obtain the best are no user serviceable parts inside. possible performance from the unit.
Page 5
Contents Getting Started ..........3 Step 1: Unpack ..............3 Step 2: Prepare the Remote Control ........3 Step 3: Hook Up ..............4 Display Indicators ..........5 Daily Operations—Playback ......6 Listening to the FM Radio ..........7 Playing Back Discs ............8 Playing Back a Tape ............
Getting Started Step 1 Step : Unpack :Unpack the package and check the accessories. After unpacking, check to make sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) •...
Page 7
Step : Hook Up Turn the power off to all components before connections. FM antenna (supplied) Extend it so that you can obtain the best reception. Black To a wall outlet Plug in the AC power cord only after all connections are complete. For better FM reception To connect the speaker cords Make sure both speakers are connected correctly and...
Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicators illuminate on the display. 1 REPEAT mode indicators (REPEAT1/REPEAT) •...
Page 9
Daily Operations —Playback Turn on the power. The STANDBY lamp on the main unit turns off. Select the source. PRESET Playback automatically starts if the selected source is 1,y, ready to start. • If you select TAPE as the source, press 3 on the STOP 7 TUNING/ main unit to start playback.
To preset the stations Listening to the FM Radio You can preset 20 FM stations. This System cannot receive AM broadcast. Tune in to the station you want to preset. Activate the preset number entry mode. To select FM FM (PRE) FM MONO •...
To play back a disc Playing Back Discs To start: To pause: To stop: This System can play back following types of discs. • Audio CD • CD-R/CD-RW (recorded in Audio CD format) Audio CD CD-R CD-RW To release, press again. To select a track •...
Start playback. Playing Back a Tape Main Unit ONLY To start: To pause: To stop: To insert a tape You can play back type I tapes. Open the cover. To release, press again. To locate a particular portion While playing a tape... Wind-forward the tape.
Daily Operations —Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (“VOL MIN”) to level 31 (“VOL MAX”). Remote control: Main unit: PRESET 1,y, Remote To drop the volume in a moment ONLY SOUND To restore the volume, press again, or...
Setting the Clock Turning Off the Power Automatically —Sleep Timer • You can set the clock only when the System is turned off (on standby). Activate the sleep timer mode. Turn off (standby) the System. sec. SLEEP Activate the clock setting mode. Specify the time (in minutes).
Advanced Radio Operations Receiving FM Stations with Remote control Radio Data System Remote ONLY Radio Data System allows FM stations to send an additional signal along with their regular program signals. • When the System tuned to the FM station which provides the Radio Data System service, the RDS indicator lights TUNING/PTY With this System, you can receive the following types of...
Searching for a Program by Switching Temporarily to a Program of Your Choice Automatically PTY Codes Remote Remote ONLY ONLY You can locate a particular kind of program from the The Enhanced Other Networks function allows the System preset stations (see page 7) by specifying the PTY codes. to switch temporarily to a preset FM station broadcasting a program of your choice (NEWS or INFO).
Advanced Disc Operations Programming the Playing Order— Remote control Program Play You can arrange the playing order of the tracks (up to 32) before you start playback. • You can repeat the programmed tracks by pressing REPEAT. CD 6 Select “CD” as the source, then stop playback. PRESET STOP 7 1,y,...
To skip a track: To pause: To stop: Playing at Random—Random Play Remote ONLY You can play back all the tracks on the disc at random. To release, press again. To check the programmed contents Playback starts in a random order. Random Play ends when all tracks are played.
Recording Operations You can use type I tapes for recording. Main unit Recording an FM Broadcast Main Unit ONLY Insert a recordable cassette. 1. Open the cover 2. Press v CD 6 CD 7 TAPE 4. Close 3. Insert AUDIO IN PRESETx PRESET4 With the recording side...
Recording from a Disc Recording from an External Device Main Unit Main Unit ONLY ONLY Load a disc and insert a recordable cassette. Connect a device and insert a recordable cassette. • If the current source is not CD, press CD 6, then •...
Additional Information Learning More about This System Troubleshooting If you are having a problem with your System, check this Daily Operations—Playback (see pages 6 to 9) list for a possible solution before calling for service. Listening to the Radio: • If you store a new station into an occupied preset number, General: the previously stored station in that number will be erased.
– DO NOT allow any rubber or plastic to remain in contact Maintenance for a long time. To get the best performance of the System, keep your Specifications discs, and the mechanism clean. Handling discs Amplifier section • When removing the disc from its case, hold it at the edge Output Power: 3 W per channel, min.
Parts Index Refer to the pages to see how to use the buttons and controls. Remote control 6, 11 6, 8, 14, 15 6, 7 7, 8, 11, 14, 15 8, 14, 15 7, 13 6, 9 12, 13 6, 10 7, 14, 15 Main unit 6, 8, 14, 15, 17...
SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮...