charge your battery before using for the first time.
Charging your battery:
1.
Insert the USB connector of the charger into the phone.
2.
When charging is compleletd, remove the USB charger from the
phone
Powering the Phone On and Off
Before the phone is powered on, ensure that the phone has been charged
and that the (U)SIM card is inserted in the phone. When the phone is
powered on without (U)SIM card inserted, a message will be displayed
advising that the (U)SIM card must be inserted to continue. Without the
(U)SIM card inserted the phone will only support emergency calls.
The phone can be powered on while it is being charged. If the phone
powers off automatically due to low power, the power‐on info will not
display until it has been charged for several minutes.
Turning the Phone On
1. Press and hold END/POWER Key.
2. If the phone has been locked, insert the lock code and select the
CENTRAL KEY to confirm.
3. The homescreen will display the default wallpaper and screensaver.
These images can be changed to one of your choice. For more information
see the section titled SET UP YOUR PHONE.
After the phone is powered on, it will identify the network supplier
automatically and finish setting up the wireless network parameters. If the
phone does not configure all parameters automatically, please consult
network service supplier for the correct parameters to complete this
process manually.
Turning the Phone Off
1. Press and hold END/POWER key for approximately 4 seconds..
7